Why is there smoke coming from my Vauxhall Zafira?

Why is there smoke coming from my Vauxhall Zafira?

Look under the bonnet for the cambelt. If it looks shiny, then the smoke is being caused by a worn cambelt. You’ll have to replace it, but we have a range of cambelt options for all Zafiras.

Why did my Vauxhall Zafira 20 TDI lose power?

This was due to the 1 and 4 injector had blew the engine up by being stuck open and leaked diesel fuel into the oil sump causing £3500 worth of damage. I have now got the car back and it’s having the same issues of 120% saturation in the exhaust.

What does it mean when your Turbo is smoking?

A smoking exhaust – If the turbo housing has cracked, or the internal seals have blown, oil will start to leak into your exhaust system. As this burns off, it produces a distinctive blue/grey smoke, which will probably become more apparent as the engine revs increase just following an idle situation.

Why are my Vauxhall Zafira doors not opening?

If you are having problems opening the doors with the key fob, especially the rear doors, then you have a problem with the electrics for the central locking. These vehicles are known to suffer with wiring issues on the rear doors. This will mean that the wiring will need to be replaced.

This was due to the 1 and 4 injector had blew the engine up by being stuck open and leaked diesel fuel into the oil sump causing £3500 worth of damage. I have now got the car back and it’s having the same issues of 120% saturation in the exhaust.

What kind of engine does Vauxhall Zafira have?

The Vauxhall Zafira has been produced across 3 generations since 1995. Current models are available with a choice of 1.4L or 1.6L Petrol engines, or if you opt for a diesel model, 1.6L or 2.0L engines are available. The recent Zafira also boasts a 5 star safety rating.

What causes a p0400 code on a Zafira?

A few Main things with Zafira that goes wrong. -EGR Valve & Inlet Manifold Caked in carbon (both need clean out). I found a leak in the manifold which caused a p0400 code ‘EGR flow Malfunction’ but after cleaning out and also changing the EGR itself the code still came up, so realised that the manifold flaps part was leaking air causing the code.