Why is my Ford key not working?

Check your fob battery to make sure that it does not need replacement. If your battery dies, you can use the center console to “read” the key even without a good battery. Try using your secondary key to start the car. Do not use the backup key as it will only open the doors and the glove box.

How do I reset my Ford Mondeo key?

Put the key in the ignition and turn the key to position 2 and back to position zero,do this 4 times in very quick succcession. You should then hear an audible beep,at this point you press any button on the key fob and you will again hear an audible beep.

How do I program my Ford Mondeo key?

Step-by-Step Programming Instructions

1. Close the car doors, then open the driver-side door. Press the UNLOCK button on the driver-side door.
2. Next, turn the ignition from OFF to RUN 8 times.
3. Press any button on the Ford remote to be programmed.
4. Have a second remote key fob?
5. Finally, turn the ignition to OFF.

How do I program my Ford Focus Key?

How to program a spare key for a Ford Focus

1. Place one of the original keys in the igniton. Turn the key from off to run and back to off.
2. Place the second original key in the ignition. Turn the key from off to run and back to off.
3. Now, place your new key in the ignition. Turn the key from off to run and back to off.

How do I program my Ford Intelligent Access Key?

Ford Intelligent Access Key Programming Instructions Press the driver and passenger power door unlock control three times. Push down and release the brake pedal once. Again, press the driver and passenger power door unlock control three times. Push down and release the brake pedal once.

How much does it cost to program a Ford key?

Transponder key programming starts at $50 – $75. This includes keys for GM, Ford, Dodge, Honda, Toyota, Nissan. Remote or fob programming starts at $65. This does not include remotes with keys attached.

Why are my key fobs not working on my Mondeo?

Try heating/warming the keyfob up if they are cold. Also I think if you read the owners manual it should tell you the keyfob programming procedure just incase its that but I’d doubt it with it being two of them unless the battery went down to 0v for long enough.

What should I do if my Ford key wont work?

However, if it won’t even try and start, then the key is worth looking at. There is an immobiliser light on early Fords. It’s always red and it’s normally a red dot, or a red padlock symbol. There are three things the Ford immobiliser light will do. Normal operation.

Why does my Ford Transit not recognise the key?

Ford Transit Pats Light No key If this happens then the car does not recognise the key. We see this when either the key hasn’t been programmed, or the cloned chip has failed. Sometimes, if a Ford Focus or Mondeo has been stood for a long time and the battery has gone flat, the car forgets the keys.

Why does my car not recognise the key?

Immobiliser light flashing. This time, when you turn the ignition on, the light flashes very quickly, about four times faster than before. If this happens then the car does not recognise the key. We see this when either the key hasn’t been programmed, or the cloned chip has failed.

Why is my Ford Mondeo key fob not working?

2009 ford mondeo 2.0 tdci. I unlocked the car and heard the locks move, opened the door and the alarm went off. Couldn’t stop the alarm with the fob … read more ASE Certified, Ford Master… Hi, I have a 2008 Mondeo titanium X 2.3 auto and my keyless start is not working.

What to do if your Ford Mondeo won’t start?

If you have a model of Mondeo which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle.

What does it mean when your Ford car key is not detected?

The car will display a Ford car key problem message by telling you ‘key not detected’ on the dashboard. When this happens, more often than not, you need a new car key. However, before you spend a lot of money on one, make sure you put a new car key battery inside.

How do you reset the remote key fob on a Ford?

On the seventh cycle, leave the key in the run position. The door locks should all cycle now, as if you pushed the lock and unlock button. Once this occurs, the lock system is in program mode. Push either the lock or unlock button on the first fob you wish to program. The locks should respond to that command.