How much power can a stock Integra handle?

On stock block and internals whats the highest psi you have tuned at? It’s not really a matter of how much PSI you boost, but how much whp the car can handle. The stock LS can handle around 300whp on average (some people can tune it better and get more hp).

How much power can a b18c5 handle?

Every combination of motors have their limits to how much horsepower they can make and a stock b-series bottom end can handle 300-365 whp regardless of the intake manifold pressure.

How much horsepower can a stock B18B1 handle?

A stock healthy B18B1 can do around 250-280whp safely. The turbo you are going with is a good choice my turbo build is using the same spec turbo. A larger from mount intercooler would be more efficient and drop charge temps better. Get some 750cc injectors and a 255lph fuel pump and have the setup tuned.

How much horsepower can a stock GSR transmission hold?

Re: How much HP gsr gearbox can handle? 750-800 seems to be the point they hold.

How much horsepower can a stock LS block handle?

The stock crankshaft can handle about 900 hp and 7,000 rpm (for a limited time).

How much boost can a stock b18c handle?

11 psi is good on a stock B18C5, tuned properly of obviously. that’ll be good for 300 wheel Hp range.

Can you turbo a stock B18B1?

How much hp can a LS1 make?

Even in emissions-legal trim, a blown LS1 will pump out over 500 wheel horsepower, with 800 wheel hp available for a serious stroker effort. With turbo motors, the sky is the limit, as 1,000 hp is a common occurrence, with the ability to adjust the power output by turning a simple boost knob.

How much hp can a stock 5.3 handle?

The stock 5.3L is factory rated around 320 hp with 340 lb-ft of torque. Most people will tell you 500-550 rwhp is a reasonably safe limit to push a stock bottom end.

How much HP can a stock B18C1 take?

Bottom line Is YES you can run a daily driven car b-motor on a stock block @10lb -14lbs on pump gas and on race gas you can run up to 25lbs !!! so there is no need to build the block if you are never going to see past 14lbs at all.

Are B18 good for boost?

In direct answer to your question, either the GS-R or the B18B are both great boost platforms, with the VTEC head doing a lot better in the upper powerband. The LS/VTEC works too, but because of the complexity of it, you’re running some differing oil lines that might make things a little complicated for you.

How can I get more horsepower from my Integra engine?

There are multiple ways to get more horsepower from an Integra engine, whether it’s a standard engine or the more powerful VTECH engine. Install a cold air intake. One of the first and most common tricks to getting more power from your Integra is the installation of a colder air intake, such as the one from Greddy.

What kind of engine does a Honda Integra B18C have?

For the B18C 98 Spec R engine, the 4-1 header was used. The power was 200 HP @ 8,000 rpm; and the torque was 186 Nm @ 7,200 rpm. This engine can be found in Honda Integra Type R. The B18C Type R engine can be identified by the red valve cover, the 4-1 header, and an intake collector. 8. B18C1 was an engine for USDM Acura Integra GSR.

When did the Acura Integra engine come out?

The Acura Integra was manufactured from 1994 to 2001 and was and still is a popular and terrific starting point for a fast, modified Japanese sport compact car. There are multiple ways to get more horsepower from an Integra engine, whether it’s a standard engine or the more powerful VTECH engine.

What kind of Perfo does Honda Integra DC2 have?

I love high redlines and VTEC but the S2000 redlines higher and the Spoon EK9 Civic Type R revs up to 11,000 RPM. Well my gt86 has similar perfo.