Do you need to replace thermostat housing when replacing thermostat?
The thermostat housing and the thermostat itself are two different components and do not necessarily need to be replaced together or at the same time. The housing is just a piece that covers the thermostat that also has an opening for a radiator hose which is where the water enters and exits the motor.
Where is the thermostat on a Saturn Ion?
Locate the thermostat housing. The housing will be on the top of the engine; you can find it easily no matter what model year Saturn you have, by following the main hose coming from the radiator to the engine block.
How to replace the thermostat in an Ecotec Cavalier?
Replacing the thermostat in the 2.2 ecotec cavalier. This will show the placement and removal/replacement process to replace the thermostat in this particular vehicle. https://teespring.com/stores/novatazz… https://www.youtube.com/channel/UC6DM… https://www.facebook.com/NovatazzCust… https://www.youtube.com/channel/UCcSU… Loading…
How do you change the thermostat on a car?
Put a new O-ring into the housing. Pull the old thermostat out of the engine block. Replace it with a new one. One end of the thermostat has a large spring on it. Place the spring into the engine. Place the thermostat back onto the engine block and bolt it into place. The thermostat does not utilize a traditional gasket.
How to replace the thermostat on a Saturn Ion 2.2?
This is the procedure for replacing a thermostat on a Saturn Ion 2.2 Ecotec. Before doing the job, purchase the two O rings for the crossover pipe and the thermostat housing. This job will take a bit of patience as you will be working in tight areas. Loading…
How is the thermostat secured to the engine block?
Place the thermostat back onto the engine block and bolt it into place. The thermostat does not utilize a traditional gasket. Rather, GM relies on the O-ring to seal the thermostat housing. Slide the radiator hose back onto the housing and secure it with the clamp. Complete the same process with the radiator inlet and the other end of the hose.