Why is the ECU not turning on my fuel pump?

As theCRANKwalker discovered the ECU doesn’t ground the fuel pump relay coil until the ignition is switched to start.

What causes no power to fuel pump, no spark?

That also cause the no fuel or spark condition, because the engine gets its timing from the signal. The wiring often gets cooked by the exhaust. It’s located down on the bellhousing on the drivers side.

What to do if your fuel pump won’t start?

Tried to start it with the pump running and it wouldn’t start. Then realized that the multi function unit probably needed to be plugged in for it to run. Plugged that back in and jumped the fuel pump from the inertia switch and it still wouldn’t start. Then checked the spark. No spark. Checked all the fuses under the hood, all ok.

How to know if your engine has no spark?

First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.

First Confirm Your Engine Has No Spark. 1 Disable the fuel system by removing the fuel pump fuse or relay. 2 Insert a spark plug tester into the plug boot and ground it on a piece of metal on the engine. 3 Finally, Have someone crank the engine and watch for spark.

What causes a car to stall with no spark?

Consequently, An old or failing ignition pickup may cut out signal intermittently, which may cause the engine to stall. The engine may suddenly just shut off, almost as if the key had been turned off. Depending on the nature of the issue, sometimes the vehicle can be restarted and driven.

Can a bad ignition pickup cause an engine to stall?

One of the first symptoms of a bad ignition pickup is an engine that stalls and eventually will not restart. Consequently, An old or failing ignition pickup may cut out signal intermittently, which may cause the engine to stall. The engine may suddenly just shut off, almost as if the key had been turned off.

Where is the spark in an ignition system?

Electronic ignition pickups are a component found on traditional electronic distributor ignition systems. They are located inside the distributor and function as the trigger for the ignition system to produce spark. The pickup coil monitors the rotation of the distributor and triggers the ignition system.