Why does my headlight fuse keep blowing?

The most common reason for faulty low-beam lights is a blown fuse. Check for melted wires leading to any of the fuses, and replace said fuses if necessary. Use a voltmeter to make sure that power is actually running to your headlight. If not, then the problem is in your wiring.

Why would a headlight keep burning out?

Any signs of condensation inside the headlight housing may indicate that water is leaking into the housing. Water and electricity don’t mix and any condensation may cause a short circuit leading to failure. Also, any condensation coming in contact with a hot bulb may cause the bulb to break.

Does each headlight have a fuse?

Like all electrical systems, the headlights in your vehicle have a fuse in the circuit to prevent too much electricity from reaching the bulb. There will also be a headlight relay that switches power from the low beams to the high beams. If the fuse goes bad, you likely won’t have any headlights at all.

What to do if a headlight fuse keeps blowing out?

Headlight Fuse Keeps Blowing Out. If you keep blowing a headlight fuse, give these simple steps a try. Unplug the light, pull the switch, and see if the fuse blows. If not, the problem is not in the wiring. Make sure you have purchased the correct wattage of bulb. Ensure that you do not have a faulty or damaged bulb.

What should I do if my headlight is not working?

Unplug the light, pull the switch, and see if the fuse blows. If not, the problem is not in the wiring. Make sure you have purchased the correct wattage of bulb. Ensure that you do not have a faulty or damaged bulb. Check and see if your high beam bulb is the issue. If so, replace it. Check all wired connections and look for any exposed wiring.

What happens when you turn on the headlights?

When you turn on your headlights, that switch activates a relay. That relay, in turn, actually provides the electrical connection between your headlight bulbs and the battery. Fuses are also involved in order to provide a sacrificial failure point to protect the rest of the wiring.

What causes a headlight bulb to burn out quickly?

Don’t handle the bulb with your bare fingers. Oils can cause bulbs to burn out quickly. Handle all headlight bulbs with surgical gloves and replace any existing bulbs that may have been handled incorrectly. The problem could be in your installation process.

Can you pull the wires from a headlight?

Don’t pull the wires that go into the headlight as you might accidentally remove them or disconnect them from the pigtail wire. Check the pigtail inside for any signs of damage, burning or melting as this can become an issue with the entire electrical system of the vehicle.