Why does my GMC Duramax have no power to trailer?

Why does my GMC Duramax have no power to trailer?

Turned out that upon closer inspection the 40A fuse for Stud#1 was blown. It looked fine from the top but when I pulled it out it was no good. If it is hooked up and did blow a fuse it would be one of the square ones furthest inboard that protects the #1 post. Your slide must have overloaded the fuse. Mine is a 40 amp if I remember correctly.

Can a Chevy Silverado tow without a brake controller?

Apparently, GM got a little smarter with their tow vehicles …. my 2015 Silverado 2500HD had 12V power at the trailer plug without doing anything and a brake controller is actually standard. Hook’em_Horns! It sucks that the brake controller and the 12V power is not ready for towing on these trucks….

What kind of power does a Chevy Silverado have?

I had the same issue with my 2008 Hummer H2. I had to add the fuses and wire the fuse box with the supplied pigtails. Apparently, GM got a little smarter with their tow vehicles …. my 2015 Silverado 2500HD had 12V power at the trailer plug without doing anything and a brake controller is actually standard.

Where is the power on a Duramax stud 2?

The trailer battery ring terminal on Stud #2 is fused with 30 Amp Maxi-Fuse. This circuit provides power to the MBEC TRLR connector inside the cab. I have no idea why you would have power to both sides of the stud 2 fuse but stud 2 would not be powered.

Turned out that upon closer inspection the 40A fuse for Stud#1 was blown. It looked fine from the top but when I pulled it out it was no good. If it is hooked up and did blow a fuse it would be one of the square ones furthest inboard that protects the #1 post. Your slide must have overloaded the fuse. Mine is a 40 amp if I remember correctly.

The trailer battery ring terminal on Stud #2 is fused with 30 Amp Maxi-Fuse. This circuit provides power to the MBEC TRLR connector inside the cab. I have no idea why you would have power to both sides of the stud 2 fuse but stud 2 would not be powered.

Where is the aux plug on a Chevy Duramax?

50 miles isn’t much for a totally drained house battery. Meter across the -ground and aux+12v pins on the 7-way plug at the rear of the truck, checking for output. Click to expand… I found the wire on lug 1 and have the voltage at the connector. The camper is in for warranty work so they are gonna check the camper end also.

Where is the MAXI fuse on a Duramax hot lead?

To provide power to the trailer hot lead, the 40 Amp Maxi-Fuse (which is BEC. The Underhood BEC is located on the left side of the engine compartment. The trailer battery ring terminal on Stud #2 is fused with 30 Amp Maxi-Fuse.

50 miles isn’t much for a totally drained house battery. Meter across the -ground and aux+12v pins on the 7-way plug at the rear of the truck, checking for output. Click to expand… I found the wire on lug 1 and have the voltage at the connector. The camper is in for warranty work so they are gonna check the camper end also.

Are there lights on my GMC Duramax trailer?

Truck is not detecting the trailer. I have a 5 pin from the harness to a 7pin adapter (new and old adapter have been tried). No brakes are installed on the trailer, that wire is not grounded but is terminated. Trailer lights work when connected to my Yukon. Trailer has 4 led running lights and 2 led tail lights.