Why does my clutch pedal feel loose?
If your clutch pedal feels loose or spongey, then check the release bearing or clutch fork for damage. Frequently we find failure in the pressure-plate diaphragm spring in mechanical units. If you have a hydraulic clutch release mechanism, check for: Air in the hydraulic system.
Which is the best pedal assist spring for a Land Rover?
We have designed an affordable, cost effective pedal assist spring that reduces the weight of the pedal significantly. As seen in the Land Rover Owners International Magazine! THIS IS 45% STRONGER/ LIGHTER THAN THE LAND ROVER OVER-CENTRE SPRING AS FITTED TO TDCI VEHICLES -80% lighter than no spring at all! (When retro fitted to TD5/ 300Tdi etc) 1.
What to do if your clutch doesn’t fit?
If the clutch pedal arm is a U shaped formed steel profile, unfortunately it wont fit, but there is a solution! Simply remove the older 200TDI style pedal box (6 bolts in the footwell) and refit with the later style pedal box – Part number SKB500280 (sold separately)
Which is lighter Land Rover over centre spring or powerspring?
THIS IS 45% STRONGER/ LIGHTER THAN THE LAND ROVER OVER-CENTRE SPRING AS FITTED TO TDCI VEHICLES -80% lighter than no spring at all! (When retro fitted to TD5/ 300Tdi etc) 1. Does the POWERspring fit my DEFENDER? The LOF POWERspring will fit Defender models 300TDI, TD5 and also TDCI PUMA vehicles.
Can a coil spring over power a clutch pedal?
The spring may over power the clutch pedal if it is allowed to go to far over centre, hence winding the bolt back in stops it holding the pedal down! Remove any existing coil spring or original over centre type spring.
We have designed an affordable, cost effective pedal assist spring that reduces the weight of the pedal significantly. As seen in the Land Rover Owners International Magazine! THIS IS 45% STRONGER/ LIGHTER THAN THE LAND ROVER OVER-CENTRE SPRING AS FITTED TO TDCI VEHICLES -80% lighter than no spring at all! (When retro fitted to TD5/ 300Tdi etc) 1.
If the clutch pedal arm is a U shaped formed steel profile, unfortunately it wont fit, but there is a solution! Simply remove the older 200TDI style pedal box (6 bolts in the footwell) and refit with the later style pedal box – Part number SKB500280 (sold separately)
THIS IS 45% STRONGER/ LIGHTER THAN THE LAND ROVER OVER-CENTRE SPRING AS FITTED TO TDCI VEHICLES -80% lighter than no spring at all! (When retro fitted to TD5/ 300Tdi etc) 1. Does the POWERspring fit my DEFENDER? The LOF POWERspring will fit Defender models 300TDI, TD5 and also TDCI PUMA vehicles.
How can I Make my clutch pedal fit?
In order to double check that it will fit, simply take a look at your clutch pedal: If the clutch pedal arm is a flat sheet of steel in terms of profile – IT FITS! If the clutch pedal arm is a U shaped formed steel profile, unfortunately it wont fit, but there is a solution!