Why are my brake lights not working on my Vauxhall Vectra?

Brake lights failing to work during driving, resets when ignition turned off and back on. No bulb light failure present Having a problem with your Vauxhall Vectra?

What do the lights mean on drive Vauxhall?

Drive Vauxhall have put together a helpful document, highlighting what each light means. For example did you know that different colour lights mean different things? For more detailed information visit Warning & Indicator Symbols. Red = Danger, important reminder Yellow = Warning, information, fault Green = Confirmation of activation

What does the coolant warning light on a Vauxhall Vectra mean?

Coolant level warning. The Vectra engine coolant light illuminates yellow when coolant levels are low. If the light illuminate whilst the engine is running, stop the vehicle and turn off the engine when safe to do so. Allow for the engine to cool and check coolant levels.

Why is the Vauxhall Vectra considered unreilable?

A reliable car does not need parts or repairing. Quote “by the end of production, the Vectra was as good as the Cavalier”.. Say no more then. GM are not noted for their engineering ability . Most people would prefer the pox over a Vectra. Vauxhall Vectra C – Why is the 02-08 Vectra considered unreilable? – RT

Why is my Vauxhall Insignia going into limp mode?

Vauxhall Limp Mode: Losing Acceleration (P2282) For the past couple of months, my Vauxhall Insignia has been going into limp mode. In case you didn’t already know, limp mode is a feature that protects your engine from further damage. Basically, your car detects that there is a problem and it reacts by shutting down certain functions in your engine.

When does DTC put a car in limp mode?

When the engine control module, transmission control module or brake control unit (ABS) detects a problem in the engine, transmission or with the brake system, it will store a trouble code in your DTC memory. If one of the control units decide that the problem is dangerous for the engine or transmission, it will put the car into limp mode.

What’s the engine management light on my Vectra?

The original swirl rod had worn and was only working two swirl flaps . So on a quick inspection looked like it was in place . My vecta 1.9cdti 150bhp 2007 model. engine management light came on and going into limp mode and giving me code p0400 and code p2279.

Where is the trouble code for limp mode?

Because of this, every time when the limp mode is active, there will be a stored trouble code in the trouble code memory. Therefore, the best solution to fix the limp mode without replacing the wrong parts is to find out which this trouble code is.

Why are front wipers not working on Vauxhall Vectra?

Front wipers not working. It’s not the fuse the heater only works on no 4 setting rewmewed switch and just the same what could be problem Rear hrw repaired line now need to reset autoguard on computer/radio screen. About 18 months ago a second hand part was used for the power steering.

How do you open the fuse box on a Vauxhall Vectra?

To open, disengage front battery cover and tilt upwards. Disengage the bar at the front of the cover of fusebox and swing it upwards. fuse box diagram (2002-2005).

Why does my Vectra dash light keep flickering?

That’s ok – could be an earthing problem then – try connecting a single jump lead from the negative post of your battery to a good clean connection on the bodywork and see if that makes any difference. What is Vectra-C.com? Introduce yourself.