Which is hotter BPR5ES or BPR6ES?
The BPR5ES will run hotter than the BPR6ES. Running a BPR6ES in an engine designed for a BPR5ES may cause premature fouling, and running a BPR5ES in an engine designed for a BPR6ES may cause detonation. Answer: The difference between the standard BPR5ES and the BPR5ES-11 is the terminal type.
Are Denso sparkplugs pre gapped?
DENSO spark plugs are manufactured with a pre-set gap. Always use a special spark plug gapping tool to change the gap. Do not change the gap on platinum, iridium or twin tip spark plugs, as the fine electrodes may get damaged.
How much does a Mazda 323 car weigh?
How much does Mazda 323 weigh? Curb weight is between 920 kg (2028.25 lbs.) and 1230 kg (2711.69 lbs.), depending on the variant, with older generation vehicles being the lightest. Is Mazda 323 a hatchback? Despite most variants having, indeed, a hatchback body style, the model is also available as a sedan and a station wagon.
When did Mazda stop making the Mazda Familia?
Mazda Familia. The Mazda Familia, also marketed prominently as the Mazda 323 and Mazda Protegé, is a small family car that was manufactured by Mazda between 1963 and 2003. The Familia line was replaced by the Mazda3/Axela for 2004. It was marketed as the Familia in Japan.
How do you adjust the point gap on a car?
Adjusting the point gap is a simple process, but it takes some patience to get the hang of it. First, make sure the rubbing block is on the high point of one of the cam lobes. If it isn’t, you will have to turn the engine a little bit in order to turn the cam.
What kind of power does a Mazda Familia have?
Power outputs (SAE gross) in Japan of the facelifted, overhead-cam-engined versions were 62 and 75 PS (46 and 55 kW) respectively. The Van (wagon) model was available with either three or five doors, although most export markets only received the five-door version.
What are the specs of a Mazda 323 II 1300?
Browse Car Specifications… Browse Car Specifications… With a maximum top speed of 91 mph (147 km/h), a curb weight of 1852 lbs (840 kgs), the 323 II 1300 has a naturally-aspirated – 4 cylinder engine, Petrol motor. This engine produces a maximum power of 68 PS (67 bhp – 50 kW) at 6000 rpm and a maximum torque of 95 Nm (70 lb.ft) at 3500 rpm.
What’s the top speed of a 1980 Mazda?
The 1980 Mazda 323 II 1300 has 68 PS / 67 bhp / 50 kW. How much does a Mazda 323 II 1300 weighs? What is the top speed of a Mazda 323 II 1300?
What kind of engine does a Mazda 1300 have?
The Mazda 323 II 1300 has a – 4, Petrol engine with 1296 cm3 / 79.1 cu-in capacity. How many horsepower (hp) does a 1980 Mazda 323 II 1300 have?
Adjusting the point gap is a simple process, but it takes some patience to get the hang of it. First, make sure the rubbing block is on the high point of one of the cam lobes. If it isn’t, you will have to turn the engine a little bit in order to turn the cam.