Where is the transmission fill plug on?

Where is the transmission fill plug on?

The AX-15 fill plug is located on the driver’s side of the tranny, near the front of the skid plate and about half way up the side of the transmission housing. This view is take laying on your back, with the front drive shaft just above your right shoulder with the top of your head towards the front of the vehicle.

How do you check transmission fluid in a 2005 Chevy Cavalier?

Transmission Fluid Checking Procedure:

  1. Start the engine and allow the engine to idle until the transmission fluid temperature has reached the value specified.
  2. Depress the brake pedal and move the shift lever through the gear ranges, pausing a few seconds in each range.
  3. Remove the fluid vent cap.

What kind of transmission fluid does a 2004 Chevy Cavalier take?

Valvoline Synthetic Transmission Fluid Dexron VI 1 Quart.

What type of transmission fluid does a 2005 Chevy Cavalier take?

Dexron™ VI Automatic Transmission
Chevy Cavalier Automatic Transmission 2005, Professional™ Full Synthetic Dexron™ VI Automatic Transmission Fluid by ACDelco®.

How to check the transmission fluid in a Chevy Cavalier?

Checking your transmission fluid level in a Chevy Cavalier is not as easy as in other cars. For starters, you won’t be able to find the dipstick. If you have regular oil changes performed at a local lube shop, you could ask the tech to check it there.

Where is the transmission fill cap on a Chevy Cavalier?

Place the vehicle in “Park” and leave running on idle. Apply the parking brake. Pop the hood and locate the transmission fill cap on the lower left-hand side (driver’s side) on the center of side of the engine. It’s a red cap; should be able to see it from the front left of the vehicle or standing near the left front fender.

How to check transaxle fluid in Chevy Malibu?

Adding Transaxle Fluid: With the engine running, add fluid at the vent cap location in half liter (1 pint) increments until fluid drains through the fluid check hole. Allow the fluid to finish draining through the fluid check hole. 1. Install fluid level screw. Tighten 12 N.m (106 lb in) 2. Lower vehicle. Loading…