Where is the oil pump on a Dodge Ram 1500?

Where is the oil pump on a Dodge Ram 1500?

The Dodge Ram 1500 oil pump location is the bottom of the engine.

How much is an oil pump for a 2005 Dodge Ram?

2005 Dodge Ram 1500 Oil Pump – from $97.99+ | AutoZone.com.

When to replace the oil pump in a Dodge Ram?

Losing lubrication in an engine will destroy it. The oil pump makes sure this doesn’t happen by cycling oil through the engine and keeping it lubricated. In most cases, the oil pump lasts the lifetime of a car, but if there is an accident or if an engine needs overhauling, the oil pump in the Dodge Ram sometimes needs to be replaced.

How do you drain the cooling system of a Dodge Ram?

Drain the cooling system of your Dodge Ram into a pan the disconnect the negative battery cables. Remove the accessory drive belt and the cooling fan and shroud. Take out the radiator and the oil fill tube with its adapter. Carefully remove the crankshaft pulley and the front cover.

How to fix a leak in a Dodge Ram?

Add the oil fill tube and adapter then the radiator. Reinstall the cooling fan and shroud and the accessory drive belt. Reconnect the negative battery cables. Turn the Dodge Ram on and check for leaks around all the parts replaced. Drive your car off the lifts if there are no leaks.

How do you install a new oil pump?

Install the new oil pump, tightening the first bolts to 44 in-lb and the second bolts to 18 ft-lb. Put the front cover back on and reinstall the crankshaft pulley. Add the oil fill tube and adapter then the radiator. Reinstall the cooling fan and shroud and the accessory drive belt. Reconnect the negative battery cables.

Where to get an oil pump replacement for a Dodge Ram 1500?

Without proper lubrication, you risk permanently damaging and having to replace your entire engine. Instead of letting it get to that point, consider an oil pump replacement for Dodge Ram 1500 at AutoZone. When you shop at a quality auto parts retailer like AutoZone, you’re sure to get the best open market products at competitive prices.

Add the oil fill tube and adapter then the radiator. Reinstall the cooling fan and shroud and the accessory drive belt. Reconnect the negative battery cables. Turn the Dodge Ram on and check for leaks around all the parts replaced. Drive your car off the lifts if there are no leaks.

Drain the cooling system of your Dodge Ram into a pan the disconnect the negative battery cables. Remove the accessory drive belt and the cooling fan and shroud. Take out the radiator and the oil fill tube with its adapter. Carefully remove the crankshaft pulley and the front cover.

Install the new oil pump, tightening the first bolts to 44 in-lb and the second bolts to 18 ft-lb. Put the front cover back on and reinstall the crankshaft pulley. Add the oil fill tube and adapter then the radiator. Reinstall the cooling fan and shroud and the accessory drive belt. Reconnect the negative battery cables.