When to replace the timing belt on an Acura?

Honda and Acura recommend replacing your timing belt every 90,000 on older models, but every 105,000 miles or 7 years whichever comes first, on models manufactured after the year 2000. Of course, it’s not always just mileage that determines whether your timing belt needs to be replaced.

How often should I change my timing belt?

Toyota and Lexus recommend a timing belt change every 90,000 on year models that are newer than 1997. Honda and Acura recommend replacing your timing belt every 90,000 on older models, but every 105,000 miles or 7 years whichever comes first, on models manufactured after the year 2000.

How often should I change the brake fluid on my Acura?

5: If you drive regularly in very high temperatures (over 110°F, 43°C), in very low temperatures (under -20°F, -29°C), or tow a trailer, replace every 60,000 miles/100,000 km. (6-cylinder models only). Independent of the Maintenance Minder information, replace the brake fluid every 3 years. Inspect idle speed every 160,000 miles (256,000 km).

When to replace timing belt on VW Passat?

If an engine is equipped with a timing belt, the timing belt must be replaced at the service interval specified by the vehicle manufacturer regardless of whether or not any problem is visible, typically in the range of 60,000 to 90,000 miles. Your vehicle owner’s manual should state the specific service interval.

Should I replace my Acura timing belt?

Acuras have one of the longest intervals for timing belt replacement. Most models, like those with 3.2-liter engines, do not need their timing belt replaced until they hit 92,000 miles or after six years, whichever comes first. Others can go as long as 105,000 miles before the belt has to be replaced.

Should I replace the timing belt?

If your car has a timing belt, it’s important that you inspect it regularly to ensure that it’s in proper working order. This small part is critical to your engine running properly, and if it breaks the results can be catastrophic. Your timing belt should be replaced every 50,000–70,000 miles, depending on your car’s make and model.

How much does it cost to replace a timing belt on?

“Now, more people know about it and what can happen when it breaks.” Replacing a timing belt for preventive reasons typically costs $500 to $900 . However, replacing a broken timing belt may cost up to $2,000 or more if it caused damage to the valves, pistons or water pump.

Where are the timing marks on an Acura water pump?

When the crankshaft timing marks are aligned, check both cam timing marks to ensure all marks are aligned (left and right sides, Figure 7). As Murphy’s Law will have it, the crankshaft will most likely be 360° out.

What happens if your timing belt breaks while driving?

So if your timing belt breaks when you’re driving, it will be a big problem and damage your engine. Your car will stop running and require a more expensive fix. Sometimes, you will have no sign that your timing belt is not in good shape. A bad belt can simply snap out of the blue.

When to replace timing belt?

Every car manufacturer recommends replacing the timing belt after a given time, and it is imperative to take this advice. The time or distance between timing belt replacement depends on the specific make and model of the vehicle, but on average it should be changed every 100,000 miles.

When do you replace timing belt on Acura MDX?

Over time the “teeth” on these belts can begin to wear, which can eventually lead to slippage and possibly engine damage. For this reason, Acura recommends replacing the timing belt every 7 years OR 105,000 miles on an Acura MDX, whichever comes first.

Should the timing belt be replaced?

Honda and Acura recommend replacing your timing belt every 90,000 on older models, but every 105,000 miles or 7 years whichever comes first, on models manufactured after the year 2000. Of course, it’s not always just mileage that determines whether your timing belt needs to be replaced.

Toyota and Lexus recommend a timing belt change every 90,000 on year models that are newer than 1997. Honda and Acura recommend replacing your timing belt every 90,000 on older models, but every 105,000 miles or 7 years whichever comes first, on models manufactured after the year 2000.

So if your timing belt breaks when you’re driving, it will be a big problem and damage your engine. Your car will stop running and require a more expensive fix. Sometimes, you will have no sign that your timing belt is not in good shape. A bad belt can simply snap out of the blue.

Do you need to change timing belt on 03 MDX?

Your 03 MDX is due. Does it need to be changed? Yes, unless you’re willing to risk damage to the cylinder heads and pistons if the belt should fail. Yes, it’s an interference engine. W/ a damaged engine your car value will plummet to parts salvage value. The answer is in your owner’s manual.

How much does it cost to replace a timing belt?

The cost was $1,009. This included: Timing belt, water pump, coolant, rear brake pads/rotors, new serpentine belt, full synthetic oil change, tire rotation. The local Acura dealer was over $2,200. I’m glad I did it tho for my piece of mind. I just had the timing belt and water pump replaced on my 2011 MDX by a small mechanics shop.

What is timing belt replacement schedule?

Your timing belt should be replaced every 50,000-70,000 miles, depending on your car’s make and model.

When should I Change my Audi’s timing belt?

When to Replace Your Timing Belt Acura. Acuras have one of the longest intervals for timing belt replacement. Audi. Most Audis have a recommended timing belt replacement at 110,000 miles. Chrysler. In general, Chrysler vehicles should have their timing belt replaced at 50,000 miles or after five years, whichever comes first. Ford. GM. Honda. Hyundai.

When to change timing belt on Acura MDX?

The owner’s manual for my 2004 MDX says that, for regular conditions in the United States, the timing belt should be changed after 105K miles or 7 years, whichever comes first. Use that as your guide.

How often should the timing belt be replaced?

If vehicle is operated at ambient temperatures under -20°F or above 110°F, inspect water pump & replace timing belt at 60,000 mile intervals. {41} – Under normal conditions, replace timing every 100,000 miles. Under severe conditions, replace every 75,000 miles.

When to replace timing belt at water pump symbol 4?

If vehicle is operated at ambient temperatures under -20° F or ambient temperatures above 110° F, inspect water pump & replace timing belt at intervals of 60,000 miles. {64} Under normal conditions, inspect water pump & replace timing belt at maintenance minder symbol 4.

How much does a timing belt replacement cost?

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM. Acura TL Timing Belt Replacement costs $771 on average.

How much does a 1999 Acura TL cost?

Acura TL Model Years Local Mechanic Cost (Belt + Tensioner + Dealership Cost 1999 – 2000 $767 – $823 $1136 – $1192 2001 – 2002 $758 – $816 $1139 – $1184 2003 – 2004 $754 – $812 $1147 – $1176 2005 – 2007 $751 – $817 $1142 – $1181

When to replace timing belt on Honda Accord V6?

The service interval is 105K miles or 8 years; which ever comes first. In addition to the belt replacement, we will be replacing, as part of preventative maintenance, the water pump and guide and tensioner pulleys. Other Honda vehicles that share this V6 engine configuration are the MDX, RDX, RL, RLX, Crosstour, Odyssey, Pilot, Vue and Ridgeline.

How much cost to replace the timing belt?

Depending on your vehicle, a timing belt service could turn into a big deal and it’s going to be costly. Having a timing belt replaced before it breaks will cost between $500 and $1,000 on average while waiting for it to break before replacing can cost upward of $2,000 or more.

How do you put a timing belt on a B18C1?

Put the B18C1 DOHC VTEC Timing Belt in place around your cam gears but again make sure there is zero slack in the back of the motor. Next line up your timing belt tensioner and install while holding on the timing belt. Put the 14mm bolt back through your tensioner and make it finger tight.