When to replace the outer window seal on a corvette?

It’s time for a Corvette Door Outer Window Seal Replacement. 01: Once you have rolled your Corvette’s window down and disconnected the battery, remove the four Phillips screws from the speaker grill in the door panel. If your Corvette does not have the Bose stereo, you can skip this step entirely.

Where does the weatherstripping start on a corvette?

They install into the upper run channel that both the door glass and the quarter windows roll up into. The channel starts in the forward opening of the door frame (just above where the front door seal head is installed). It follows the “A” pillar upwards and proceeds along the roof to the rear of the quarter glass opening.

What are the upper stops on a corvette door?

These two bolts stop the glass from going up too far. They are called the upper stops. Start by loosening them. Roll the glass up into the T-top or roof panel weatherstrip.

How to remove window glass on Corvette door?

Use a window crank spring removal tool on the window handle and lock knob. 03: You will need to use an Allen wrench to remove the bezel around the door mirror remote control. Now carefully remove the door panel. 04: Loosen the door glass lower stops. This will allow the door glass to go down further into the door.

What causes a C4 Corvette weatherstrip to leak?

Select a category to narrow your results. Leaking windows, wet carpets, rattling door glass and ill-fitting body panels can all be the result of poorly manufactured or deteriorating 1984-1996 C4 Corvette weatherstrip.

These two bolts stop the glass from going up too far. They are called the upper stops. Start by loosening them. Roll the glass up into the T-top or roof panel weatherstrip.