What tool do I need to remove a rotor?
What Tools Do You Need To Change Brake Pads and Rotors?
- Ratchet and Socket Kit. To fix your vehicle, you must have a socket set.
- Torque Wrench. A torque wrench is a must.
- Brake Pad Spreader or C-Clamp.
- Torx / Allen Set.
- Brake Bleeder Wrench.
- Jack and Jack stands.
- Lug Nut Wrench.
Can you remove rotor without removing caliper?
In the rear the solid rotor (278mm) requires bracket removal but the vented rotor (292mm) can be removed without taking the bracket off.
What size bolts to remove rotors?
Everyone knows that rotors are sometimes hard to remove if they are rusted onto the hub. So there are two threaded holes, and you can grab the right bolts from somewhere else, and thread them into those holes to pop off the rotor. The correct size is M8 x 1.25.
How much does it cost to replace a rotor?
Rotors cost between $30 and $75 each. Higher-quality rotors like Duralast Gold, which feature a coated hat and edge and are designed to outperform your vehicle’s original equipment, usually cost a little more. Labor at a shop to replace rotors and pads is approximately $150 to $200 per axle.
How do you remove an engine from a Cavalier?
Loosen the clamps on the upper and lower radiator hoses at the engine. Remove the hoses from the engine, then tuck them under the frame or behind the radiator to keep them out of the way. Remove the fuel feed and return lines from the engine, using the appropriate line wrench. Remove the coolant pipe assembly, using the appropriate wrench.
How do you remove coolant tank from Cavalier?
Rotate the pulley toward the center of the engine to loosen tension on the belt. Lift the belt off of the pulleys. Loosen the clamp on the coolant overflow tank, using the screwdriver, then unbolt and remove the overflow tank, using the appropriate socket.
How do you remove fuel pump from Cavalier?
Lift the cover, and using the diagram on the underside of the cover, locate the fuel pump relay. Remove the fuel pump relay — you should be able to pull it out with your fingers. Start the car and let it run until it stalls. If the car won’t start, turn it over five or six times to relieve the pressure in the fuel system.
What to do if your Cavalier has Freon in it?
Drive or tow the vehicle to a service facility that is licensed to work on the air-conditioning system, and that has a reclaimer, if there is Freon in the system. Have them evacuate the Freon, as the EPA mandates that it cannot be released into the atmosphere.