What size are thermostat housing bolts?
The bolt size is M10 X 1.25, which is a standard metric sice. The US bolt head is 15 mm which is very simmelar to 9/16 inch depending on the toleracnes of the tools.
Where is the thermostat on a 99 cavalier?
Thermostat is located at the motor’s end of the top radiator hose. Make sure your vehicle’s motor is not hot, before opening the cooling system.
How do you put a thermostat on a Chevy Cavalier?
Make sure the engine is cool. Open the hood of your 1996 Chevy Cavalier. Remove the radiator cap. Place a large, shallow pan under the radiator. Unscrew the drain plug on the radiator and allow the coolant to drain into the pan. Locate the lower radiator hose, which runs between the radiator and the Cavalier’s engine.
Where is the thermostat located on a Chevy?
Open the hood to access the engine compartment. Trace the top radiator hose from the radiator to the engine. Locate the two bolts at the top of the housing to which the hose is clamped. The thermostat is located in the housing. Unbolt the nut with a socket wrench.
How to install a thermostat on a 2000 Monte Carlo?
How Do I Install a Thermostat on a 2000 Monte Carlo? Drive the Monte Carlo onto a set of ramps and secure the parking brake. Open the engine hood and prop it with the hood prop. Open the radiator cap to release pressure on the cooling system. Do not open the cap on a hot engine. Allow the engine to cool adequately.
Why does the thermostat fail on a Chevy?
Chevy designed the thermostat in the Chevrolet car to fail in the “safe” position. This prevents the engine from overheating but it also prevents the coolant from reaching the operating temperatures needed to effectively heat the inside of the vehicle.
Make sure the engine is cool. Open the hood of your 1996 Chevy Cavalier. Remove the radiator cap. Place a large, shallow pan under the radiator. Unscrew the drain plug on the radiator and allow the coolant to drain into the pan. Locate the lower radiator hose, which runs between the radiator and the Cavalier’s engine.
Open the hood to access the engine compartment. Trace the top radiator hose from the radiator to the engine. Locate the two bolts at the top of the housing to which the hose is clamped. The thermostat is located in the housing. Unbolt the nut with a socket wrench.
How Do I Install a Thermostat on a 2000 Monte Carlo? Drive the Monte Carlo onto a set of ramps and secure the parking brake. Open the engine hood and prop it with the hood prop. Open the radiator cap to release pressure on the cooling system. Do not open the cap on a hot engine. Allow the engine to cool adequately.
Chevy designed the thermostat in the Chevrolet car to fail in the “safe” position. This prevents the engine from overheating but it also prevents the coolant from reaching the operating temperatures needed to effectively heat the inside of the vehicle.