What kind of rear axle does a Ford F-100 use?

What kind of rear axle does a Ford F-100 use?

(The Mopar wheels fit the Ford 5 X 4 �” rear ends just fine). If, due to availability in your area or cost, you want to use a rear end with the 5 X 5 � ” bolt pattern but have it changed to a 5 X 4 �” bolt pattern, there are two basic ways of doing this: 1.

How to remove a Ford axle step by step?

SHARE THIS ARTICLE: Please feel free to share this post on Facebook / Twitter / Google+ or any automotive Forums or blogs you read. You can use the social sharing buttons to the left, or copy and paste the website link: https://www.diyford.com/ford-axle-removal-complete-step-step-instructions/

What’s the best way to dislodge an axle?

Use a slide hammer tool, such as this one, to pop the axle shaft loose. It’s a great tool to have in your shop, but runs about $150. You can use pry bars to dislodge the axle shaft but be careful not to bend the plates. (Later, you’ll see how the bearing arrangement traps the plates on the axle shafts.)

Can a rear axle be removed from a tri five?

Tri-Five vehicles use a leaf spring style (or Hotchkis) of rear suspension. If your vehicle has a coil-style arrangement, there are some differences for removing the axle from the vehicle. The main one is that there are control arms bolted between the axle and frame or body that need to be removed.

(The Mopar wheels fit the Ford 5 X 4 �” rear ends just fine). If, due to availability in your area or cost, you want to use a rear end with the 5 X 5 � ” bolt pattern but have it changed to a 5 X 4 �” bolt pattern, there are two basic ways of doing this: 1.

What’s the best way to disassemble an axle?

Use the correct-size deep-well socket or a shallow socket with an extension to reach in and loosen the four lock nuts nuts (a deep-well socket avoids the socket falling off the extension and having to fish the socket out from behind the axle flange). Notice that the brake hardware is in place.

What happens when you remove the nuts from an axle?

The rectangular shaped steel plate under the nuts holds the axle shafts and bearings in the housing. Once the nuts have been removed, you can lightly pull the plate loose. It is still trapped on the axle shaft, but you need to make sure it is loose.

How do you remove a rear axle from a Chevy Silverado?

If you want to remove a rear axle to swap it for another, this can be done at home with the right tools. In this case, the project vehicle is a 2002 Chevrolet Silverado, but the process is similar for other vehicles as well. Lift up the vehicle using the jack and place it on jack stands.