What is the OBD code for Honda Accord VSA?

The obd codes were scanned and the code p0341 was read. The camshaft position sensor was replaced and the lights turned off and the p0341 codes were cleared. The second time the lights came on the car was in motion.

What are the VSA warning lights on a Honda Accord 6?

Vsa Warning Light On problem of the 2014 Honda Accord 6 Failure Date: 12/03/2018 3 dashboard lights appear illuminated on dashboard all at once while driving the car, these three lights that remain illuminated include 1) anti-lock brake system (abs) light, 2) vehicle stability control system (vsc) light, and 3) electric power steering light.

What can be wrong with my Honda Accord?

My Honda Accord 2008 has the vsa and a triangle light on…. Q: My Honda Accord 2008 has the vsa and a triangle light on. What can be wrong with my car?

What are all the lights on a Honda Accord?

See all problems of the 2009 Honda Accord . 3 dashboard lights appear illuminated on dashboard all at once while driving the car, these three lights that remain illuminated include 1) anti-lock brake system (abs) light, 2) vehicle stability control system (vsc) light, and 3) electric power steering light.

Is there a TSB for a 2014 Honda Accord?

The following TSB (s) may apply to your 2014 Honda Accord. The source of the information below is the National Highway Transportation Safety Administration (NHTSA), which maintains TSBs for vehicles sold in the United States. If there are no TSB’s listed for your vehicle, that does not necessarily mean there are none.

Are there any genuine Honda Accord ABS control modules?

We offer a full selection of genuine Honda Accord ABS Control Modules, engineered specifically to restore factory performance. Please narrow the Anti Lock Brake Control Module results by selecting the vehicle.

How to troubleshoot VSA system in Honda Accord?

6. Disconnect the VSA modulator-control unit 36P connector (see step 3 on page 19-137). 7. Check for continuity between body ground and the appropriate wheel speed sensor +B and GND terminals of the VSA moduIator-controI unit 36P connector individually (see table).

What is the DTC code on a Honda Accord?

MIL will indicate DTC’s by outputting a number of flashes. Remember, these are manufacturer specific codes only. Refer to our Generic OBD II code list for definitions on all other Honda diagnostic trouble codes. Manufacturer Specific Codes P1106BARO Circuit Range/Performance Malfunction P1107BARO Circuit Low Input P1108BARO Circuit High Input