What is the gap on a 350 Chevy?
Spark Plug Gap Spark plugs for the Chevy 350 engine are readily available from any auto parts store. Spark plugs come pre-gapped, but you should always verify the gap with a spark plug gap tool. The gap for a 350 small block should be 0.035 inches.
What are the dimensions of a 1982 Corvette?
1982 Corvette Specs
| Body Specs | |
|---|---|
| Wheelbase | 98.0 inches |
| Rear Track | 59.5 inches |
| Length | 185.3 inches |
| Ground Clearance Differential to Ground | 7.8 inches |
What is the width of a 1982 Corvette?
1982 Chevrolet Corvette
| bodywork | ||
|---|---|---|
| Length | 4704 mm | 185.2 inches |
| Width | 1753 mm | 69 inches |
| Height | 1219 mm | 48 inches |
| Ground clearance | 109 mm | 4.3 inches |
What was the compression ratio of a 1982 corvette?
As part of the entire Corvette drive train, Cross-Fire Injection adds to overall improved acceleration for 1982. And Corvette’s compression ratio is an impression 9.0 to 1. How it works: Cross-Fire Injection is a completely electronic system which constantly monitors and adjusts the engine air/fuel ratio to ambient driving demands.
What are the specs of a 1982 corvette?
1982 Corvette Specs Wheelbase 98.0 inches Overhand (Front) 42.4 inches Overhang (Rear) 44.9 inches Front Track 58.7 inches
How big is a 5.7 V8 Corvette?
7 V8 Size, Dimensions, Aerodynamics and Weight : Body : Coupé : Num. of Doors : 2 : Wheelbase : 265.6 cm or 104.57 inches : Length : 456.6 cm or 179.76 inches : Width : 186.9 cm or 73.58 inches : Height : 121.2 cm or 47.72 inches : Front Axle : 157.2 cm or 61.89 inches : Rear Axle : 157.5 cm or 62.01 inches
What was the rear hatch on the 1982 Corvette C3?
The introduction of the rear hatch on the Collectors Edition C3 was a definite precursor to the next-generation C4 Corvette . Aside from the glass hatch, the Collectors Edition also featured many unique accoutrements that set it apart from other 1982 Corvettes.
What kind of engine did the 1982 Corvette have?
Since both the 5.7 and 5.0 liter V8s were part of Chevrolet’s small-block V8 family, they had the ability to interchange parts. Chevrolet decided the 1982 Corvette would come standard with TBI equipped 5.7 liter V8 and the Camaro Z28 would have as its optional engine, a TBI 5.0 liter V8.
What was the horsepower of the corvette L83?
Chevrolet would give this engine the RPO code of L83. It seemed to make sense since from 1975 until 1980 the L82 4-bbl 350 CID V8 which was rated at between 205 to 230 horsepower (from 1975-1980) was the Corvette’s high-performance motor option.
What was the compression ratio on a 1975 Corvette?
It had an 8.2-to-1 compression ratio in 1975 to help deliver 165 horsepower. A year later output increased to 180. In 1979, the Corvette received a new dual snorkel air cleaner to help further boost horsepower to 195.
How much does a 1982 Chevy Corvette cost?
Shipping Weight: Same as base curb weight except 3 gallons of gasoline. Paper Filter Element in Carburetor Inlet. Notes: Base Corvette Coupe with 350 cu. in. 200 hp engine with automatic transmission: $16,258.52. Collector Edition Hatchback: $22,537.59.