What is the difference between a Farmall M and a Super M?

What is the difference between a Farmall M and a Super M?

What is the difference between the Super M and a regular M? The M has a 248 cu. inch engine, the Super M has a 264 cu. in.

What is the rarest Farmall tractor?

Production data The International, or standard version production totaled only 158. These totals are quite low compared to other tractor models built by International Harvester, and today the Farmall 1026 could be considered a rare tractor, and the International 1026 extremely rare.

How much horsepower does a Farmall M have?

Farmall M
Weight 4,858 pounds (2,204 kg), 6,770 pounds (3,070 kg) ballasted
Propulsion Rear wheels
Engine model International Harvester C248 (gasoline)
Gross power 38 horsepower (28 kW)

What is a Super M Farmall?

The Farmall Super M was the upgraded model International Harvester Released in 1952. The Super M increased the horsepower on the drawbar from 33 horsepower to 44 horsepower. It also has a larger four-cylinder, 264 cubic-inch gasoline engine. 57,092 Super M were built from 1952 to 1954.

What is a Farmall Super M worth?

Could be anywhere from $100 to $5000 depending on condition, location, local demand, sentimental value, etc..

How many Farmall Super M were made?

The Super M has a 264 cid engine with a 6-volt electrical system. The Farmall Super M has five forward gears and one reverse gear. There were about 44,551 Super Ms produced, 5,199 Super MDs produced and about 26,924 Super MTAs produced.

What was the first Farmall tractor?

The first Farmall tractor with a direct-start diesel was the model 350, which appeared in 1956. The 350 could also be ordered with a gasoline or LP-gas engine. The 350’s direct-start diesel engine was built by Continental Motors.

When was the last Farmall tractor made?

1985
While the last tractor was made in 1985, Farmall remained open until June 1986 in a shutdown phase.

How many horsepower is a Farmall 300?

Farmall 300

Farmall 300 Power
Plows: 3-bottom
Drawbar (tested): 35.43 hp 26.4 kW
Belt (tested): 38.42 hp 28.6 kW
power test details …

How much does a Farmall Super M?

Farmall Super M

Production
Manufacturer: Farmall (a part of International Harvester)
245 (Super MV)
Original price: $2,500 (1954 )
The basic Farmall/IH model is the Super M. The Super MD is diesel. The Super MTA has the torque amplifier and independent PTO, and was built only in 1954.

What killed Farmall?

On May 23, 2003, a 13-year-old farm youth was killed when he became entangled in an unguarded rotating power take-off (PTO) shaft at the rear of his narrow front Farmall Model M tractor.

Why did Farmall go out of business?

The company wanted all dealerships to look alike. Yet the company’s facilities were antiquated in some significant areas. Farmall Works, for instance, was a 1926 building, and by the 1970s and ’80s, had become inefficient compared to the modern tractor plant of its main competitor, Deere.

What kind of fuel does a Farmall M tractor use?

Farmall M Engines International Harvester 4.1L 4-cyl distillate International Harvester 4.1L 4-cyl gasoline Fuel tank: 21 gal 79.5 L Aux. fuel: 1 gal 3.8 L Engine details Mechanical Chassis: 4×2 2WD

What was the size of a Farmall MD diesel engine?

The MD diesel was simply a model M, same features and options, but with International’s newly upgraded gas-start diesel. While the MD engine was of a similar design to the WD-40, it had five rather than three main bearings and displaced 248 cubic inches versus 460.

Can a IH pump fit a Farmall tractor?

IH pumps will likely only fit the wider spacing, but you may be able to find a pump made by an after-market supplier that will fit the narrower spacing. None of the M series tractors came with three-point hitches, but they can be added as aftermarket items. At least three ATISmembers have done so, and wrote the following descriptions.

What was the original price of a Farmall M tractor?

Original price: $2,600 (1952 ) The M was also available in the MV high-clearance “vegetable version” and the MD diesel. The Farmall M was the row-crop version of the McCormick-Deering W-6.

How big was the fuel tank on a Farmall MD diesel?

With the MD’s 16-gallon fuel tank, a farmer could conceivably do a day’s work on one tank of fuel. “The engine was cranked over using a 12-volt starter and would idle at 600-800 rpm. This was enough to warm the engine up as long as needed for diesel combustion to be possible.”

How does a diesel engine work on a Farmall tractor?

At the same time, the control disengaged the distributor ground, opened a fuel valve in the carb and a butterfly valve that connected the gas cycle combustion chamber to inlet air and closed the diesel intake. The diesel side of the 248-cid gas-start four-cylinder diesel shows the IH injection pump and dual fuel filters.

Farmall M Engines International Harvester 4.1L 4-cyl distillate International Harvester 4.1L 4-cyl gasoline Fuel tank: 21 gal 79.5 L Aux. fuel: 1 gal 3.8 L Engine details Mechanical Chassis: 4×2 2WD

What kind of filter does a Farmall diesel have?

The diesel side of the 248-cid gas-start four-cylinder diesel shows the IH injection pump and dual fuel filters. They took clean fuel seriously, with a water separator (glass bowl) followed by a primary and fine secondary filters. The injection pump has it’s own fuel pressure gauge that warns the operator when the filters are becoming restrictive.