What does putting a chip in your car do?

It increases the vehicle’s speed and power by making intelligent variations to the parameters such as the amount of fuel mixture supplied to your engine, ignition timing, fuel cut, and so on which ultimately increases the vehicle’s horsepower. Performance chips can help your car become more responsive.

How do you install chip tuning?

INSTALLATION IN 5 STEPS

1. Open the engine compartment lid.
2. Disconnect the sensor connectors and plug in the wiring loom.
3. Connect the Tuningkit box to the wiring loom.
4. Secure the Tuningkit box in the engine compartment.
5. Close the engine compartment lid and start enjoying driving.

How much does it cost to chip a car?

Professional installation can cost anywhere from $400 to $700 depending on the type of car that you have. If you believe that you can install the chip yourself, a new chip can cost $300 to $600 depending on the type of vehicle you are tuning.

Is chipping a car worth it?

It’s a process commonly known as ‘chipping’. And companies that do it frequently claim the procedure can result in improved performance, with as much as 30 per cent more power and 10 per cent more fuel economy.

What do you need to know about Chip tuning installation?

Chip tuning installation – What you need to know about the installation. Every RaceChip product follows our plug & play principle, which means that you can install it yourself in just a few minutes. We believe that even complex and sophisticated products should be as easy as possible to use.

Where do I connect the racechip to my car?

Connect the RaceChip to the FCI connector of the wiring harness. Secure the cable and the RaceChip at a suitable point in your engine bay and then fasten the cover. All done! Now have fun driving! Determine your accelerator type. There are two different types of accelerators.

Do you need special tools to install racechip?

No. You can install RaceChip with no specialist mechanical know-how. In rare cases the air filter box must be disassembled in order to reach the sensor. In these cases we recommend finding a garage if you don’t have mechanical know-how. Special tools are not necessary for the actual installation of the chip.

How long does it take to install racechip?

Every RaceChip product follows our plug & play principle, which means that you can install it yourself in just a few minutes. We believe that even complex and sophisticated products should be as easy as possible to use. You’ll receive vehicle-specific installation instructions with your order.

Where are the performance chips on my car?

Our Performance Chips do not affect or alter your vehicle’s emissions. Start your vehicle. Locate the OBD2 port typically found under the dashboard on the driver’s side. Plug the chip into the OBD2 port and wait 15 seconds. Press and hold the SYNC/RESET Button on the front of the chip for another 15 seconds.

Is it safe to install a performance chip?

No wire cutting wires or tools needed to install our performance chip. Chip Your Car Performance Chips are safe for your vehicle, and the vehicle warranty! Get your new performance chip FAST! Free same-day shipping. Boost the power and throttle response of your vehicle without cutting wires.

Is it safe to use chip your car?

Chip Your Car Performance Chips are safe for your vehicle, and the vehicle warranty!

Do you need a performance chip for your ECU?

Whether your vehicle has stock ECU tuning or has aftermarket modifications, our performance chip will adapt to your modifications and provide the tune necessary for your vehicle’s individual setup. All performance chips are dyno and road tested. No wire cutting wires or tools needed to install our performance chip.