What does it mean when your anti-lock brake system light comes on?

The anti-lock braking system (ABS) helps the tires on your vehicle to maintain contact with the road while you are braking. If the warning light comes on while you are driving, it means the ABS is not working properly. Your brakes will still work, but the ABS might not engage if you need to make an emergency stop.

What is the color of the anti-lock brake system warning lamp?

The ABS light in your vehicle is a dashboard warning light that is specifically associated with the anti-lock braking system. These lights are usually amber in color, although they can also be yellow, orange, or even red in some applications.

What should you do if your anti lock brake light stays on?

If your ABS warning light stays on, you need to get your brakes checked immediately. But don’t just drive immediately to a garage, as your car may not be safe to drive. Instead, consult your car’s handbook, as it might tell you more about operating your car with this warning light in mind.

What does yellow brake warning light mean?

Amber Brake Warning Light The yellow (ABS) warning lamp indicates an electrical problem in the ABS, like the controller or a sensor. A faulty wheel speed sensor will illuminate the yellow (ABS) warning lamp.

When should an anti lock braking system ABS warning light turn off?

Explanation: Every vehicle fitted with anti-lock brakes must have a warning light in the cab of the vehicle. The warnings may differ between manufacturers, but on all types the warning light should come on when the ignition is switched on, and turn off when the vehicle reaches a speed of 6 mph (10 km/h).

Why does my Acura ABS light keep coming on?

Common symptoms that you may notice when there is a problem with the Acura ABS: Wheels may lock and slide when braking. Common problems that trigger the ABS light to stay on: To reset the ABS light on an Acura, you first need to read the codes with an ABS scanner.

What does the Check Engine light mean on an Acura?

Figure 9. Check engine light. The ABS light is an indication something is wrong with your Anti-lock Braking System. In an emergency braking situation, ABS pulses the brakes versus allowing them to completely lock up, this improves vehicle control and reduces the risk of skidding or causing an accident.

How can I read the ABS code on my Acura?

Allow your OBD-2 scanner to connect to the vehicle. This may take a few seconds. Select ACURA from the menu. Next, select the Anti-lock Brake System menu. Using an OBD-II Scanner that can read the ABS, read codes from the ABS module.

What to do if your Acura Dashboard Light does not turn on?

Park your ACURA in a safe area where you can work safely. Locate the diagnostic port under the dashboard. Turn on the ignition. All ACURA dashboard lights should turn on but do not start the engine. If your ACURA has START/STOP button, press it twice without pressing on the brake pedal. Allow your OBD-2 scanner to connect to the vehicle.

When does the Acura warning light come on?

The light also appears when the parking brake is applied. Be sure to release the parking brake before driving if the light appears while driving, press the brake pedal lightly to check the pressure.

What does it mean when the Acura brake light comes on?

Have an auto mechanic diagnose your Acura braking system. If this light comes on, it means there is low oil pressure in the engine. Stop the vehicle as soon as possible and check the oil level. Add oil if the level is too low.

Why does my Acura have a battery symbol?

The emission control system may have a problem or your engine cylinder could be misfiring. If the battery symbol appears on the dashboard, it means that there is a problem with the charging system. The battery is not getting charged, or the alternator is not generating enough power.

Why does the Acura airbag indicator light come on?

If the airbag indicator light comes On, it indicates that the Airbag system and seat belt tensioner is malfunctioning. Have a professional auto mechanic check your vehicle to make sure you are driving with the safety features of your Acura is functioning normally.

What does it mean when your anti lock brake system light comes on?

Why is my anti lock brake light still on?

If you know your car’s anti-lock brake system is in good condition and the light is still on, there are some steps you can take to reset the light. The problem most likely lies in the car’s central computer or ABS sensor, but it can also be from something else in the brake or electrical system.

Can a parking brake light be activated by ABS?

Usually, the brake fluid level sensor and the parking brake are the only two items that can activate the BRAKE light. But, not all vehicles are the same, and some of the earliest ABS systems would trigger both lights simultaneously for any ABS fault.

What does the anti lock braking system do?

Basically, the function of the anti-lock braking system is to keep your vehicle’s tires on the road as you aggressively step on the brake. That way, the wheels don’t lock up or skid uncontrollably on the road during the braking process. This is particularly important if the road is slippery or wet.

What to do if your anti lock brakes are on the Fritz?

When your anti-lock brake system is on the fritz, here’s how to fix it. Going over the river and through the woods was more dangerous back when cars had crummy bias-ply tires, rear-wheel drive and less effective drum brakes.

How do I know if I have anti lock brakes?

Take note of the lights on the dash. If your vehicle is equipped with an ABS or anti-lock braking system, an alert light is going to illuminate every time you turn your key to the power or on position. This alert light will be yellow in color and will display the words “anti-lock” or “ABS” on the display of the alert light.

What does it feel like when anti lock brakes?

When ABS is working properly, the driver may feel the brake pedal suddenly drop, followed by a rapid pulsing sensation . There may be a grinding or buzzing noise coming from the vehicle during the period ABS is activated. It may also feel like the brake pedal is pushing back when ABS activates.

Why do anti lock brakes warning stay on?

One of the causes responsible for ABS light stays on is losing hydraulic pressure. When inspecting why your ABS warning light stays on, you need to inspect the levels in your brake reservoir to see whether it has lost a significant amount of brake fluid or not. Low levels of the brake fluid is a possible cause making the warning light stays on.

Why does the brake warning light stay on?

Here are some things to look for when you see that your Brake Warning light has been turned on: One of the main reasons the Brake Warning Light comes on is a brake needs to be replaced. Low brake fluid or worn brake pads are other reasons your Brake Warning Light may come on. Leaking brakes are another reason the Brake Warning Light may come on.