What color are runway markings and runway hold lines?

Markings for runways are white. Markings defining the landing area on a heliport are also white except for hospital heliports which use a red “H” on a white cross. Markings for taxiways, areas not intended for use by aircraft (closed and hazardous areas), and holding positions (even if they are on a runway) are yellow.

When driving across a parking apron from point A to point B What is the proper route a vehicle operator should use?

25 Cards in this Set

What is the force of wind behind an aircraft called?

Drag—a rearward, retarding force caused by disruption of airflow by the wing, rotor, fuselage, and other protruding objects. As a general rule, drag opposes thrust and acts rearward parallel to the relative wind.

What should you do when approaching an aircraft at night?

When approaching an aircraft at night, vehicle operators should do which of the following Turn off headlights and leave parking lights on Except when an aircraft is being serviced, loaded, or unloaded, vehicles should never be driven within __ feet of an aircraft

Why are there lights on an airplane at night?

These universally defined colours and locations of the lights on an aircraft help pilots to determine if other aircraft are approaching or flying away, and their direction of flight. At night time, other aircraft would not be visible if they did not have lights.

When do aircraft need to have position lights?

They consist of position and anti-collision lights Regulation: Aircraft position lights are required to be lighted on aircraft operated on the surface and in flight from sunset to sunrise (or in Alaska, during period of a prominent unlighted object cannot be seen from a distance of 3 Statute Miles (SM) or the sun is more than 6° below the horizon)

Are there any navigation lights on an airplane?

During night hours, no person shall operate an aircraft unless it has lighted position lights. These are referred to as Navigation Lights or commonly known as Position Lights. Aircraft Navigation lights don’t actually help the pilot navigate.

When do you switch to low beam headlights?

Switch to low beams when oncoming traffic is within ______ for your vehicle. When you approach another vehicle from behind, dim your lights before you reach closer than ___ feet. A.) Glare from oncoming headlights makes it difficult to see. B.) Reduced lighting makes driving more dangerous and difficult.

When do the position lights turn on on an airplane?

Ground Operations and Taxi 1 Position lights are on anytime an aircraft has electric power available. 2 Logo lights are switched on during preflight inspection. 3 Aircraft maintenance: Technicians will turn on red anti-collision lights when working with hazardous components (gear doors, flaps).

Is it safe to turn on airplane lights at night?

Pilots and maintenance crews are very careful when using or testing these lights, especially at night. Turning on landing lights when ground personnel are nearby can cause severe eye damage. Landing and taxi lights use several types of bulbs. Just like cars, different aircraft types use different bulbs. 757 Landing lights (GE Q4995X).

How is driving at night aided by headlight glare?

Driving at night on unfamiliar highways is not aided by oncoming headlight glare. The glare of headlights in the opposite lane is magnified by the fact that many people drive with the high beams on continually, no matter where they are or the general visibility of the roads.