What are the steps to change a flat tire?

How to Change Tires

1. Find a Safe Location. As soon as you realize you have a flat tire, do not abruptly brake or turn.
2. Turn on Your Hazard Lights.
3. Apply the Parking Brake.
4. Apply Wheel Wedges.
5. Remove the Hubcap or Wheel Cover.
6. Loosen the lug nuts.
7. Place the Jack Under the Vehicle.
8. Raise the Vehicle With the Jack.

What are the five steps to change a flat tire?

HOW TO CHANGE A FLAT TIRE IN FIVE STEPS

1. Step One: Get Safe. Before you exit your vehicle, you need to pull over or find a place away from the rush of traffic on the road.
2. Step Two: Grab Your Tools.
3. Step Three: Loosen and Lift.
4. Step Four: Change the Tire.
5. Step Five: Lower and Tighten.

Can I call someone to change my tire?

Yes, it can be a good idea to call the police to help you with a flat tire, especially if you are in an unfamiliar, possibly dangerous area, or if your car is blocking traffic. The police will be able to put flares around your car so that other drivers will see it, and luckily, they are trained to change tires.

How do you change a flat tire without a jack?

Try placing two large rocks in front and behind the tire and fill the hole back up with dirt. Disengage your emergency brake, start the car, and put it in forward drive. Slowly try to make your way out of the hole and lift the axle up off the blocking materials.

Can I change my tire myself?

It’s possible to install your own tires. While some may argue that installing your own tires can save you money, it’s definitely a job that’s better left to your tire shop or service center professionals. Installing new tires is a job best left to your auto repair service center professionals.

Is changing a tire easy?

Changing a tire is actually rather physically demanding. You have to put some muscle in getting the lug nuts off and cranking the jack, and then you have to bend down and lift the tire.

Does AA come out for flat Tyres?

If the puncture is not suitable for temporary repair — tears in the sidewall due to hitting the kerb, for example, are a common cause of punctures — the AA will send a recovery vehicle to take the car to the driver’s destination or to the nearest tyre centre.

Can I put air in my tire after using Fix-a-Flat?

After using Fix-a-Flat, you may still need to inflate the tire with air so that it reaches the recommended psi level. Drive to the nearest air pump – Any nearby gas station should have air pump. Fill the tire – Pump air into the tire up to the recommended psi level, checking it frequently with a tire gauge.

Can someone come and change my tire?

Make a quick phone call to 1-800-Tires-Plus and someone will be on their way – 24 hours a day, 365 days a year. The Tires Plus Roadside Assistance Program offers wrecker and towing services to the Tires Plus store of your choice, as well as the following services at preferred rates: Tire change.

Can I drive 1 mile on a flat tire?

You should never attempt to drive any further than a couple hundred yards on a flat tire, even if it isn’t completely deflated. This may not be enough distance to get you to an auto garage, but you can at least creep along until you’re away from the hazards of the highway.

How do you change a flat tire in your car?

To begin the process of changing the flat tire, locate your spare tire and jack in the trunk of your vehicle. Most models store these two items in a compartment underneath the floor of the trunk. Carefully lift the spare tire and place it on the ground in close proximity to the flat tire. Car jacks usually have a built in lug wrench.

How do you change the tires on a BMW?

Step 1. Place the lug nut wrench on each lug nut one at a time. Apply counterclockwise, downward force with your foot to loosen each lug nut. BMW wheels generally each have five lug nuts. Loosen the lug nuts before jacking the car up so that the wheel does not spin while suspended in the air.

Where do you put the wheel wedges when changing a flat tire?

Wheel wedges go in front of or behind the tires to further ensure the vehicle doesn’t roll while you fix the flat tire. If you’re changing a rear tire, place these in front of the front tires. If your flat tire is at the front, put the wheel wedges behind the rear tires.

Where to put the tire jack on a flat tire?

The right place for the jack is usually beneath the vehicle frame alongside the tire that’s flat. Many vehicle frames have molded plastic on the bottom with a cleared area of exposed metal specifically for the jack. To safely lift and avoid damage to the vehicle, follow the instructions for jack placement in your vehicle owner’s manual.

To begin the process of changing the flat tire, locate your spare tire and jack in the trunk of your vehicle. Most models store these two items in a compartment underneath the floor of the trunk. Carefully lift the spare tire and place it on the ground in close proximity to the flat tire. Car jacks usually have a built in lug wrench.

Step 1. Place the lug nut wrench on each lug nut one at a time. Apply counterclockwise, downward force with your foot to loosen each lug nut. BMW wheels generally each have five lug nuts. Loosen the lug nuts before jacking the car up so that the wheel does not spin while suspended in the air.

Wheel wedges go in front of or behind the tires to further ensure the vehicle doesn’t roll while you fix the flat tire. If you’re changing a rear tire, place these in front of the front tires. If your flat tire is at the front, put the wheel wedges behind the rear tires.

The right place for the jack is usually beneath the vehicle frame alongside the tire that’s flat. Many vehicle frames have molded plastic on the bottom with a cleared area of exposed metal specifically for the jack. To safely lift and avoid damage to the vehicle, follow the instructions for jack placement in your vehicle owner’s manual.