How to replace the rear hub bearing on a Ford Explorer?
Loosen the lug nuts from the wheel which the bearing is going to be replaced. Step 2: Raise and secure the vehicle. Raise the vehicle and secure it on jack stands, and then remove the wheel. Place blocks of wood underneath the front and rear of the wheel diagonally opposed from the one you will be working on.
How to replace wheel hub on Ford F-150?
Install new wheel hub to steering knuckle with four 18mm bolts. Reinstall the 13mm wheel bearing center nut and bearing cap. Reinstall brake caliper bracket and brake calipers.
How do you replace a rear drum on a Ford Focus?
1.) When installing the drum, you must replace the spindle nut. If you re-use the spindle nut, it will not hold the proper torque specifications. 2.) Tighten the nut down, but do not reach your final torque. 3.) Spin the drum 10 times counter-clockwise while torquing the hub nut to specifications. The nut should be tightened to 174 ft-lb of torque.
How did I replace the rear wheel bearings with drum brakes?
Being outraged at the Ford price and also being a cheap bastard, I reused mine by doing a little body work on them afterward and hammered them out straight enough to use again. It’s not tough. A little hammer, vise and punch gets them good to go again. To remove them, you take a blade screw driver and hammer it in the crack and then pry them out.
Loosen the lug nuts from the wheel which the bearing is going to be replaced. Step 2: Raise and secure the vehicle. Raise the vehicle and secure it on jack stands, and then remove the wheel. Place blocks of wood underneath the front and rear of the wheel diagonally opposed from the one you will be working on.
Do you need to replace front wheel bearings?
The bearings will only press into the hubs and you are good to go. It is not expensive as you don’t need to break the bank before replacing your bearing and hub assembly.
Which is the best wheel hub and bearings?
Prime Choice Auto Parts Brand New Front Wheel Hub and Bearing Assembly 7. MOOG 515036 Wheel Bearing and Hub Assembly 8. LED Kingdomus 513188 Front Wheel Bearing and Hub Assembly 9. ECCPP Wheel Hub and Bearing Assembly Front 515078 10. Timken SP500300 Axle Bearing and Hub Assembly
Why are there seals on front wheel bearings?
In addition, the Front Wheel Bearing and Hub Assembly has premium seals which are designed to assist in the prevention of damage during installation. The seals also provide improved protection so that the bearing life can be extended while enhanced durability will be achieved.
How can I tell if my Ford Explorer has a bad bearing?
Test Drive – The best way to diagnose bearing noise in your Explorer is to take it for a drive. You’ll be looking to hear the hum increase as the speed picks up. Jack and Wiggle – With your Explorer on jack stands, you’ll want to look and see if the wheel is wiggling at the bearing. If it is, that’s proof positive that you need a new wheel bearing.
What does it mean when your Ford Explorer wheel is not wiggling?
Jack and Wiggle – With your Explorer on jack stands, you’ll want to look and see if the wheel is wiggling at the bearing. If it is, that’s proof positive that you need a new wheel bearing. If it does not wiggle, that does not automatically mean the wheel bearing is good.
What happens when a rear hub bearing fails?
They hold the entire weight of the vehicle and are subject to the harsh conditions of the road, as well as exertion from the torque of the engine. When they fail, they will begin to make a howling noise, which will progress into a grinding, and when completely failed may seize, rendering the vehicle undriveable.