How to fix a Silverado stuck in 4WD?

1. Remove the negative cable from the battery; wait a few minutes (3 minutes worked for me). 2. Reconnect the negative (ground) cable to the battery. 3. Start the truck only (do not put it in gear, do not hit any buttons, etc…)

What to do when the fuse blows on a Chevy Silverado?

First unplug the actuator and see if the fuse blows. If not the actuator is bad, If the fuse blows, unplug the motor on the transfer case. If the fuse does not blow with the motor unplugged, but does with it connected, remove the motor from the case and try again.

What to do if your Chevy Silverado dies?

How can I tell if my Chevy Silverado transmission is bad?

Look for blown fuses or damaged wiring. If the wiring and fuses are good, go to Step 2. The transmission in your truck is controlled by the PCM (powertrain control module). It is sophisticated enough to be able to tell you if there is an issue with your transmission.

Can a GM Truck be stuck in 4WD?

From buying research to owner support, join 1.5 MILLION GM Truck Enthusiasts every month who use GM-Trucks.com as a daily part of their ownership experience. I have been involved in a similar thread ( http://www.gm-trucks.com/forums/index.php?…rt=#entry815696) with a similar problem.

What to do when your truck is stuck on 4low?

When your truck or SUV is stuck on 4low. Just simply put your vehicle in Nuetral, then turn switch to 4H..you’ll be able to switch to what ever you want from that point. Also note that when your vehicle is in 4 low it disables Stabilitrak or traction control.. Both cannot work at the same time.

Can a Silverado get out of a 4low?

We were camping at the coast, got stuck in the sand, put our 2003 Silverado in 4low, got out of the sand but couldn’t get out of 4L. We googled the problem at the campground and it worked!!! It saved these two senior’s camping trip!