How much HP can a B18B1 handle?

If you want to save a bit, don’t sleeve it. Just go with forged internals. Properly tuned, stock sleeves can handle 500 whp.

How do you tell what year my B18B1 is?

look on the head….. theres the year of the head…. That is the block id #, you should be able to tell by the first number what year it is. For a b18b, if it starts with 1, it will be 94, 2=95, 3=96, 4=97, 5=98, 6=99, 7=00, and 8=01.

What does a pr4 ECU come out of?

any one know what a pr4 ecu powered orginally? It is out of a 90 LS. Redline is at 6,800. The 7,200 rev limit was for the 94 plus LS’s.

What car does a B18B1 come in?

B18B1 comes from 94-01 Acura Integra LS.

How do you tell what year my b18c1 is?

Look on the head near the exhaust ports on the left side. it should have a circular stamp with the year on it.

Is a p72 ECU VTEC?

The p72 will work for a b16 head AFAIK. You may have a hard time locating a p72 obd1 ECU, and they don’t come cheap. You can’t use a stock LS ecu since it has no way of controlling VTEC.

Is a P2E ECU VTEC?

This ECU is connected to the H22A 2.2L VTEC engine and used for anyone planning a H series swap. P2E – The next generation of Honda Civic DX, this ECU is in the 1996-1998 model years.

Is the Integra Type your engine the same as the B16A?

Note: This engine uses the same block as the Integra Type R (B18C5), which is taller than the B16a block (by approx 17 mm), but with a crank the same stroke as the b16a. It uses longer rods to accommodate for this, which is why the Rod/Stroke ratio is higher than a standard B16. Note: Only offered with SiRs with automatic transmissions.

Is the B18A part of the B series?

The B18A is not considered part of the modern B-series family. This engine shares many characteristics with the B20A/B21 JDM version is marked B18B on the block without any number. JDM version has a compression 9.4:1 where the usdm version is 9.2:1.

What is the ECU code for a Honda Integra?

ECU code: PCT. ECU Socket Type: OBD-2A(1996-1998 models) / OBD-2B(1999-2000 models) Note: This engine uses the same block as the Integra Type R (B18C5), which is taller than the B16a block (by approx 17 mm), but with a crank the same stroke as the b16a.