How much does it cost to replace a heater core in a 2002 Ford F150?

How much does it cost to replace a heater core in a 2002 Ford F150?

The average cost for a Ford F-150 heater core replacement is between $736 and $902. Labor costs are estimated between $634 and $800 while parts are priced at $102.

How much is a heater core for a 2003 F150?

2003 Ford F150 Heater Core – from $51.99+ | AutoZone.com.

How do you replace the heater core on a Ford F-150?

Using a 3/4 socket, remove the drain plug from the radiator to allow it to drain. Once it’s drained completely, re-install the plug. Take caution not to over-tighten it. Coolant passes through the heater core in vacuum lines, which need to be drained of coolant as well. There are two options to remove this coolant.

Where are the heater hoses on a Ford F-150?

They are generally somewhere on the passenger side near the top of the engine bay on the firewall. To disconnect, push the hose in, press in the tabs, and then pull the hose off. This can be a little tricky so it may take a few tries. Figure 3. Remove heater core hoses. Figure 4. F-150 quick disconnects.

Where does the heat come from in a Ford F-150?

This article applies to the Ford F-150 (2004-2014). The heater core is responsible for getting heat into the cabin by pulling heat from the warm coolant leaving the motor.

How do you remove a blender core from a Ford F-150?

Remove the glove box door to access the blend door and heater core from inside the car cabin. Remove the glove box by simply squeezing both sides to the inside; it should come off. Figure 5. Remove by squeezing both sides of the door. Disconnect the vacuum line connector and the vacuum line panel pod by prying them off gently.

Using a 3/4 socket, remove the drain plug from the radiator to allow it to drain. Once it’s drained completely, re-install the plug. Take caution not to over-tighten it. Coolant passes through the heater core in vacuum lines, which need to be drained of coolant as well. There are two options to remove this coolant.

This article applies to the Ford F-150 (2004-2014). The heater core is responsible for getting heat into the cabin by pulling heat from the warm coolant leaving the motor.

They are generally somewhere on the passenger side near the top of the engine bay on the firewall. To disconnect, push the hose in, press in the tabs, and then pull the hose off. This can be a little tricky so it may take a few tries. Figure 3. Remove heater core hoses. Figure 4. F-150 quick disconnects.

How do you replace the radiator on a Ford F-150?

Position a drain pan underneath the drain hole on the radiator. Remove the coolant reservoir cap; make sure the engine is cool before removing it. Using a 3/4 socket, remove the drain plug from the radiator to allow it to drain. Once it’s drained completely, re-install the plug. Take caution not to over-tighten it.