How much coolant does a 2005 Silverado take?
The 2005 Silverado’s cooling system holds 3.8 to 6.7 gallons of coolant, depending on optional equipment. Tighten the coolant overflow reservoir cap.
How to change the coolant in a Hyundai Tucson?
Continue to add clean demineralized or distilled water in small quantities until the fluid level stays up in the radiator neck. 6. Start the engine, top off the radiator with water and then add coolant to the reservoir until the level is between “L” and “F”. 7.
What to do if coolant level drops in Hyundai?
If the level is below the “L” mark, add engine coolant to bring it up between “L” and “F”. If the level is low, inspect for coolant leaks and recheck the fluid level frequently. If the level drops again, visit your Hyundai dealer for an inspection and diagnosis of the reason.
How do I change coolant in my car?
Open the drain cock on the radiator. Allow all the engine coolant to drain from the cooling system, then securely close the drain cock. 4. Check Section 9 for the capacity of the cooling system in your car.
When to add coolant to the engine reservoir?
The level of the coolant should be between the “L” and “F” lines on the reservoir when the engine is cool. If the level is below the “L” mark, add engine coolant to bring it up between “L” and “F”. If the level is low, inspect for coolant leaks and recheck the fluid level frequently.
Continue to add clean demineralized or distilled water in small quantities until the fluid level stays up in the radiator neck. 6. Start the engine, top off the radiator with water and then add coolant to the reservoir until the level is between “L” and “F”. 7.
Open the drain cock on the radiator. Allow all the engine coolant to drain from the cooling system, then securely close the drain cock. 4. Check Section 9 for the capacity of the cooling system in your car.
If the level is below the “L” mark, add engine coolant to bring it up between “L” and “F”. If the level is low, inspect for coolant leaks and recheck the fluid level frequently. If the level drops again, visit your Hyundai dealer for an inspection and diagnosis of the reason.
What should coolant level be when replacing engine coolant?
Never allow the concentration of antifreeze to exceed the 60% level or go below the 35% level, or damage to the cooling system may result. For proper concentration when adding or replacing the engine coolant, refer to the following table. The coolant level can be seen on the side of the plastic coolant reservoir.