How many amps is a DR44G alternator?
145 Amps
Specifications
| Brand | Delco Remy |
|---|---|
| Output | 145 Amps |
| Color | Silver |
| Series | DR44G |
| Voltage | 12 |
Are 5.3 LS Motors?
The GM 5.3L engine (326.1 ci, 3.78-inch bore 3.62-inch stroke) is by far the most-produced displacement in GM’s Gen III, IV, and V family tree. There are millions of these lying around in the salvage-yard—and like all “LS”-based engines, they can produce big power even in well-used, 100,000-mile trim.
What should the voltage be on a GM alternator?
Ideal Voltage Output Ideally, the GM alternator should be putting out anywhere between 13.5 and 14.5 volts. A voltage regulator helps regulate the voltage that an alternator provides. If the voltage dips below the optimal range, then the regulator kicks in to get the alternator to make more voltage.
How do you wire an alternator in a Chevy?
How to Wire a Chevy Alternator. Connect the #2 terminal to the positive terminal on the battery. This terminal can also be jumped directly to the BAT terminal. This line is used to regulate the power generated by the alternator. Attach the alternator fan belt to the pulleys on the engine and alternator.
What do you need to change an alternator?
Remove the main power cable from the alternator. The main power cable will be the thick cable attached to the alternator that runs from the battery. Depending on how much space you have in your specific vehicle, you may be able to use a ratchet, but in some, you may only be able to fit an open-ended wrench.
Where can I find the GMC Vandura repair manual?
Chilton has the most accurate and up-to-date GMC G2500 Vandura repair manual online, available right now. Our GMC G2500 Vandura online content is updated monthly, ensuring you have the most up-to-date information for all your repairs, service, and maintenance.
How do you change the alternator on a car?
Changing the alternator on most cars is generally the same. Find the alternator (has to be connected to the serpentine belt), and then look up steps to replace it. The main difference in cars is where the alternator is and how it’s mounted.
Do you need to remove serpentine belt to change alternator?
As you loosen the bolts, the alternator will slide in the bracket under the tension of the belt. You may not need to remove the serpentine or accessory belt if it’s not damaged.
Can a manual tensioner be used to replace an alternator?
The belt tensioner will only travel (swing) so far which can make installing the belt difficult. Never pry or force the belt onto the pulley. Vehicles with a manual tensioner or the belt tightens with the alternator, there should about ½ inch of deflection in the belt between the pulleys with the greatest distance between them. 7
Chilton has the most accurate and up-to-date GMC G2500 Vandura repair manual online, available right now. Our GMC G2500 Vandura online content is updated monthly, ensuring you have the most up-to-date information for all your repairs, service, and maintenance.