How do you reset the anti theft system on a Chevy Cavalier?

Re: HOW TO BYPASS THE ANTI THEFT SYSTEM IN A CHEVY… Turn key on if u see system security light flashing wait 10 min when light turns off turn key off wait 5 sec repeat that same process 2 more times for a total of 30 min on the last one turn key to off wait 5 sec then start worked on a 2000 cavalier.

How do you override anti-theft system?

Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.

What should I do if my Chevy Cavalier wont start?

Here’s my fix, or workaround, turn the key to the point where the dashboard lights up with all the different icons and you can open the automatic windows, but do not start the car. Put the car in Neutral, then turn the key the rest of the way to start the car.

Can you reset the anti theft system on a Cavalier?

Thanks for your advice i appreciate the help. what i did is while the car was running with the stereo on i cut the wires to the anti theft system that come from the ignition. then opened the odometer up and put electricle tape over the light. Yes, cutting the yellow wire will do it. If you disconnect the battery you need to reset it.

When to turn off ACC on Chevy Cavalier?

2ND TURN TO ACC LET IT STAY ON OF 11 MINS. TURN IT OFF AND BACK ON TO ACC FOR 11 MINS. TURN IT OFF AND BACK ON TO ACC FOR 11 MINS. THE CAR ON ALL THE WAY JUST TO THE ACC WHEN TRYING TO RESET . AFTER THE 33 MINS IT’S OK TO START.

Is there a Chevy Cavalier ignition switch recall?

There is a recall on 2001 in the serial range, it will be installed for free and if the ignition switch is bad it will be replaced for free. Now was yours done, from the small purple wire from the starter relay there will be a splice and the wire will go up to radiator support to the relay.

How to reset check engine light on Chevy Cavalier?

The way it was described to me for OBDII gm’s is to turn the ignition on, depress the fuel pedal for a full minuite, release and turn the ignition off for a full min, then retry. This is also similiar to how you reset check engine light on gm’s newer cars, except you have to hold the radio button while depressing the pedal and IGN on

How to disable the theft system on a Chevy Cavalier?

Just leave the key in the run position and the “Theft System ” light on the dash will be flashing. Leave the key on for about 10 minutes and the light will stop flashing and go on solid. Then the theft system is disable.

How to disable the PassLock sensor on a Chevrolet Cavalier?

Under the ignition cylinder there is a small connector. Unplug it. This is your passlock sensor. Key on 3 times for 11 minutes each. You may need a battery charger. At the end of the 3rd ignition cycle if the PCM doesnt see the passlock sensor “because you unplugged it” it will disable the passlock.

When does the security light come on on a Chevy Cavalier?

The security light usually comes on with all the the lights and just like all the lights it will go off within 10 seconds as long as no error is seen.

How do you reset the anti-theft system on a Chevy Cavalier?

How do you reset the theft system on a 1998 Chevy Cavalier?

1-Turn ON the ignition, with the engine OFF. 2-Attempt to start the engine, then release the key to ON (vehicle will not start). 3-Observe the SECURITY telltale(this is the security light), after approximately 10 minutes the telltale will turn OFF. 4-Turn OFF the ignition, and wait 5 seconds .

How do you reset the theft system on a 1999 Chevy Cavalier?

1) Put the key in the ignition and turn to the “ON” position. Leave it that way for 10 minutes. After 10 minutes turn the key and take it out. Repeat this process (2) more times (3 times, 30 minutes total) This should reset the PASSKEY system to recognize your key.

How do I disable the factory anti-theft system?

Insert the car key into your car’s ignition and turn it on. The car’s accessories will be activated but not the engine. Step 3: Do another check on the anti-theft light. If it isn’t blinking any longer, then turn the key over to the Off position and let it sit for a couple of minutes.

What does it mean when the anti-theft light stays on?

If this is a factory equipped anti-theft system, and you try to start the car with the wrong key, typically you’d see a warning light on the dash that will stay lit after all the other warning lights have gone out when you attempt to start the car. Typically this warning light is the image of a key.

What does it mean when the theft light stays on?

On your particular vehicle the security light staying on as the vehicle is running is an indication that the security system has failed and is disabled. When the security Warning Light is illuminated, that means that the theft-deterrent system may not be working properly.

How do you reset the anti-theft system on a 1997 Chevy Cavalier?

What does the theft system light mean?

What does it mean if the Anti-theft Light is on in the dash? Your car has a built-in anti-theft system. If someone attempts to start the car without a programmed key, open a locked door without a key, or even get in through the rear liftgate or open the hood, the horn will start honking and the lights will flash.

How do I bypass the security system on a 97 cavalier?

How do I get my car out of anti-theft mode Pontiac G6?

1 Answer

Sit in your car and ensure all doors are closed.
Put the key into the ignition while holding the lock button on the driver’s door.
Turn the G6 key in your ignition from “On” to “Off” while holding the “Lock” button, and do two more cycles of “On” and “Off” in quick succession.

Where is the anti-theft fuse located?

Locate the fuse box containing the alarm fuse. It is usually located on the dashboard by the driver’s door, in front of your left knee. You may find the alarm fuse in this fuse box.

How to program a GM / Chevy coded / anti theft key?

HOW TO PROGRAM A GM/CHEVY CODED/ANTI THEFT KEY FOR FREE! SAVE MONEY!!! – YouTube HOW TO PROGRAM A GM/CHEVY CODED/ANTI THEFT KEY FOR FREE! SAVE MONEY!!! If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.

How do you reset the PassLock on a 1998 Chevy truck?

Turn your key clockwise to crank the ignition. Wait for your truck to start, which confirms that you have successfully reset the passlock on your ’98 Chevy truck. Based in Chicago, Kenyonda Bradley has been writing for online publications since 2008.

How to reset the security for a 1996 GMC?

Sanstrom has undergone advanced automotive training at the Dunwoody College of Technology, holds an Associate of Arts in general studies from Century College and has more than 10 years of experience in all aspects of automotive repair and diagnosis. How to Reset the Security for a 1996 …

What happens to the crank sensor on a GMC?

The crankshaft sensor on GMC vehicles is synced to the powertrain control module, or PCM. When the crank sensor is replaced, it must be resynced to the PCM. Without resyncing, the PCM cannot properly determine the position of the crankshaft.