How do you replace a car fan clutch?

Replace the Fan Clutch There will be four to six 10mm bolts that will hold the actual clutch part of the fan to the fan blade itself. Remove these nuts and the clutch will come free from the blade. Once you have matched up the old fan clutch to the new unit reassemble it by installing and tightening the nuts in a cross pattern. 5.

How big is the nut on a fan clutch?

1. Identify the Nut Size Each fan clutch will have its own mounting nut size which will range from 22mm to 36mm depending on the application and manufacturer. You can also use a large adjustable wrench if you do not have the proper tool. You may need to remove the fan shroud to get at the cooling fan. 2. Hold the Water Pump Pulley

Do you have to take off radiator shroud to replace fan clutch?

If you’re lucky, there may be enough room to unbolt and remove the fan and clutch without taking off the radiator shroud. More likely, you’re going to have to remove the shroud. This means draining some coolant, disconnecting the upper radiator hose and sometimes removing the belt.

How to remove a clutch nut on a 2005 Ford F-150?

After battling the clutch nut on a 2005 Ford F-150 5.4L with both a band wrench and a special removal kit that didn’t fit my vehicle, it occurred to me there may be a better way. If you’ve struggled like I have, you may find this method pretty helpful. All you need is a length of chain about 8-10 inches long. Loading…

When to replace clutch fan in Chevy Silverado?

If your truck’s engine is running hotter than normal, the A/C fails to pump out cold air on idle, and there is leaking silicone fluid around the engine, chances are the clutch fan is busted. Fortunately, this is a component you can replace yourself.

How do you remove a fan from a Chevy Silverado?

Attach a large adjustable wrench to the nut holding the fan to the water pump pulley. Rotate the nut counterclockwise to loosen and remove the fan. If the fan is on too tight, you can use a hammer to knock the wrench and force the nut loose. Remove the fan by rotating the blades counterclockwise until the fan can be pulled off of the pulley.

When to replace the clutch on a Chevy Silverado?

Fan clutch for the Chevy Silverado. Signs that your clutch fan is in need of replacing are pretty straightforward: if you can hear excessive fan noise, the engine is running excessively hot, the A/C is no longer pumping out cold air on a regular basis, and you can feel a slight vibration coming from the front end.

How do you remove the fan shroud on a Honda Accord?

Disconnect the radiator hose on the passenger’s side of the shroud, and un-clip the hose from the center of the shroud. Then, use a flat head screwdriver to pop out the retainer pins. There are four pins along the edge of the shroud facing the engine. Remove the shroud and set it aside. Figure 2. Remove two 10mm bolts from the fan shroud. Figure 3.