How do you remove the power steering pump from a GM reservoir?
Locate the two metal snap flanges on each side of the reservoir. Use a slot screwdriver to pry them apart and pull the reservoir out of the pump body. The reservoir will have a large tube nipple that slips out of the pump body. Be sure to keep the O-ring inside the pump.
How do you remove a power steering pump?
To remove one, lift the button with a trim tool or screwdriver which extracts the inner shaft from the hollow shaft. This reduces the diameter of the larger hollow shaft and allows the two-piece assembly to pull out of the hole. Don’t try to pry the large flange without first lifting the button or you will damage the fastener. 3.
How do you attach a power steering pulley?
Attach Power Steering pulley. This is performed with the pulley press. The press has two pieces — (a) a through bolt, and (b) a hub press. 1) Screw the hub press completely on the through bolt. 2) Grease the pulley and the pump hub. 3) Place pulley on pump hub. 4) Attach through bolt into hub.
Is the power steering pump a line replaceable unit?
In my opinion, the power steering pump should be viewed as a line replaceable unit. Rebuilding will not be addressed in this instructable. The pump replacement is easy to do once a few tricks are recognized. For example, do not attempt pump replacement without locating a power steering pump pulley puller.
How do you replace a power steering shaft?
Slip the ring over the two-piece adapter to keep it together. Use one wrench to hold the flanged nut, and another to turn the hex head of the puller bolt. As you tighten the bolt, the pulley will slide off the shaft. If you’re lucky.
To remove one, lift the button with a trim tool or screwdriver which extracts the inner shaft from the hollow shaft. This reduces the diameter of the larger hollow shaft and allows the two-piece assembly to pull out of the hole. Don’t try to pry the large flange without first lifting the button or you will damage the fastener. 3.
Can a power steering pump be replaced on a 1990 Chevy?
Power steering pump replacement GMC Chevrolet Pickups 1990 good for several years. If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations. To avoid this, cancel and sign in to YouTube on your computer.
How does a power steering pump work on a Chevy Silverado?
The power steering pump on V8 Silverado engines is retained by four 15mm bolts. Three bolts secure the pump to the bracket and one bolt secures the bracket to the engine. While supporting the pump, use a socket and ratchet to remove the three bracket bolts. Then, slide the pump out.
How does a GM steering system kit work?
Due to inconsistent steering feel, GM introduced a kit (19168825) to remove the EVO component from the system. The kit has an adapter and union that allows the existing high pressure hose to be connected to the back of the pump after the EVO unit was removed. The GM kit allows the pump to function as a normal steering system would. This