How do you release an ignition lock cylinder?

There are two parts to removing this component. First, insert the key and unlock the steering wheel. Next, use a flat blade screwdriver to press a small metal push pin that is located underneath the ignition lock cylinder. By depressing this switch, you’ll be able to unlock the cylinder from the housing.

What happens when you turn the ignition key on a Saturn?

If the battery is known to be fully charged, the Saturn should start. If there is an error in the ignition switch, you will not hear the typical faint “click” when you initially turn the ignition key to the “III” position to crank the engine.

Where is the fuse on a Saturn ignition?

Open the fuse panel under the steering column by turning the knob on the fuse panel counterclockwise and pulling down on the cover. Locate the fuse for the starter in the fuse panel using the fuse diagram on the underside of the fuse panel cover. Remove the fuse using a fuse puller in the fuse box.

How can I unlock a locked steering wheel?

1. Try pulling the key out a very small amount before gently turning key. (About 1/16 of an inch, the thickness of a nickel). 2. Wiggle key while trying to turn key gently.

What to do if you have ignition switch problem?

If you are experiencing problems with your ignition key or switch, you may need a simple key reset or you could have a faulty ignition switch that needs to be replaced. Open the fuse panel under the steering column by turning the knob on the fuse panel counterclockwise and pulling down on the cover.

What to do when your ignition key won’t turn?

If for example the front wheels are pointing to the left, then go inside your vehicle, step on the brake, and turn the steering wheel MORE to the left, then WITHOUT RELEASING pressure, try and turn the key to start your engine. Now if your front wheels are pointing to the right, use the same method, but turn the steering wheel to the right instead!

Can a faulty ignition switch cause a car to not start?

There is a component inside the dash and linked to the ignition switch that sends a signal to the starter motor allowing the vehicle to start. If you are experiencing problems with your ignition key or switch, you may need a simple key reset or you could have a faulty ignition switch that needs to be replaced.