How do you check an alternator on a PT Cruiser?

Check Alternator Connect the positive probe of your multimeter to the positive side of your battery. Connect the negative probe of the multimeter to the negative side of your battery. Your multimeter needle or display should change to show the output of the battery.

How do I know if I need a battery or alternator with a multimeter?

Place the red lead of the voltmeter to the positive battery terminal and the black lead to the negative terminal. Avoid touching your skin to the battery. Read the voltmeter. If the battery reads above 12.2 volts, it has enough juice to start the alternator, which can then be tested with the voltmeter.

What are the symptoms of a bad alternator in a Chrysler PT Cruiser?

Here are the most common symptoms of a bad alternator in a Chrysler PT Cruiser: The battery light is designed to tell you that there is not enough voltage to properly charge the battery, or that the battery itself is not holding the proper voltage. In rare occasions the service engine soon light may light up.

How can I tell if my alternator is good or bad?

Take a look at the following test interpretations to find out which one best fits your multimeter test results: CASE 1: The battery’s voltage, with the engine running and all accessories On, was between 13.5 and 14.5 Volts. This tells you that the alternator on your Neon (Stratus, Cirrus, Breeze, PT Cruiser, etc.) is good and charging the battery.

What should the volts be on a PT Cruiser?

With your PT Cruiser turned off, you’ll connect the negative side of the meter to the negative battery post or wire. You’ll then touch the positive side of the voltmeter to the positive battery wire. With the engine off, you should get a reading somewhere between 12.0 volts and 12.6 volts.

What happens when a PT Cruiser battery dies?

When the battery gets so dead it will no longer be able to power your PT Cruiser’s ignition system. As the ignition system is no longer able to produce a full powered spark, the engine will begin to sputter and stall.

Why is my PT Cruiser battery not working?

Battery failure is a common reason cars don’t start when you need them most, and getting stranded on your way to work is an awful experience. Ensure that your Chrysler PT Cruiser battery operates well wherever you drive by upgrading from AutoZone today.

What are the signs of a bad alternator or battery?

Signs of a Bad Alternator or Battery Your stomach sinks as you put in your key, only to have your car not turn on. If your car won’t start, it’s often due to a malfunction of either the battery or the alternator. If it’s one of those two, placing the blame can be relatively simple.