How do you change the alternator on a V6 Saturn?
On V6 models, use a wrench on the tensioner’s center bolt and turn it clockwise; then remove the drivebelt tensioner by removing its two bolts. Pull out the mounting bolts for the alternator and disconnect its electrical connector.
How do you replace an alternator in a car?
Loosen and remove the two mounting bolts that secure the alternator to the engine block, using a ratchet and 13mm socket. Manipulate the alternator to remove it from under the car. Slide in the replacement alternator and attach the positive battery wire to the back of it, securing it with the nut you removed earlier.
How do you disconnect the battery on a Saturn?
Disconnect the battery by turning the positive terminal bolt counterclockwise. Lay the terminal wire aside. Do not allow it to touch the battery. Jack the Saturn up at the passenger side wheel and remove the wheel by turning the lug nuts counterclockwise. Set the wheel and tire aside.
What kind of engine does a Saturn 2.2 have?
Models made before 2008 may have a 2.2 L L61, 2.4 L BAS hybrid, 3.0 L L81 or 3.5 L L66 engine. Starting with 2008, models may have a 2.4 L LE5, 3.5 L LZ4 and 3.6 L LY7 engine. Disconnect the negative battery cable with a socket wrench and remove the air duct for the throttle body if you have a 2.2 L engine.
On V6 models, use a wrench on the tensioner’s center bolt and turn it clockwise; then remove the drivebelt tensioner by removing its two bolts. Pull out the mounting bolts for the alternator and disconnect its electrical connector.
Loosen and remove the two mounting bolts that secure the alternator to the engine block, using a ratchet and 13mm socket. Manipulate the alternator to remove it from under the car. Slide in the replacement alternator and attach the positive battery wire to the back of it, securing it with the nut you removed earlier.
Do you need to remove serpentine belt to change alternator?
As you loosen the bolts, the alternator will slide in the bracket under the tension of the belt. You may not need to remove the serpentine or accessory belt if it’s not damaged.
Disconnect the battery by turning the positive terminal bolt counterclockwise. Lay the terminal wire aside. Do not allow it to touch the battery. Jack the Saturn up at the passenger side wheel and remove the wheel by turning the lug nuts counterclockwise. Set the wheel and tire aside.
As you loosen the bolts, the alternator will slide in the bracket under the tension of the belt. You may not need to remove the serpentine or accessory belt if it’s not damaged.
Models made before 2008 may have a 2.2 L L61, 2.4 L BAS hybrid, 3.0 L L81 or 3.5 L L66 engine. Starting with 2008, models may have a 2.4 L LE5, 3.5 L LZ4 and 3.6 L LY7 engine. Disconnect the negative battery cable with a socket wrench and remove the air duct for the throttle body if you have a 2.2 L engine.
How do you change the alternator on a Saturn Ion?
Replace the wheel, tighten the lug nuts and lower the car from the jack. Reconnect the battery’s positive terminal by turning the bolt clockwise onto the battery. Determine which alternator your Saturn Ion will need. You’ll want to be sure the new alternator is compatible with your Ion’s engine.
What kind of alternator do I need for my Saturn Vue?
Determine which alternator your Saturn Vue will need. You’ll want to be sure the new alternator is compatible with your Vue’s engine. Models made before 2008 may have a 2.2 L L61, 2.4 L BAS hybrid, 3.0 L L81 or 3.5 L L66 engine. Starting with 2008, models may have a 2.4 L LE5, 3.5 L LZ4 and 3.6 L LY7 engine.
Where is the alternator located on a Saturn?
Replacing the alternator on a Saturn car can be challenging, due to the location of the alternator within the Saturn car engine bay. A Saturn car alternator is located at the lower left passenger side of the engine block.
How do you change an alternator on a 4 cylinder car?
On most four-cylinder engines, use a breaker bar on the tensioner hole and turn it counterclockwise. On V6 models, use a wrench on the tensioner’s center bolt and turn it clockwise; then remove the drivebelt tensioner by removing its two bolts. Pull out the mounting bolts for the alternator and disconnect its electrical connector.