How do you bypass parking brake wire in dash DVD?
How to Bypass an Automobile DVD Player’s Parking Brake Safety…
- Pull the unit from your dash (assuming it is installed already).
- Find the ground wire (-12 volt).
- Strip the ends off of the wire that is supposed to be connected to the parking brake, the ground for the dvd player and the ground wire from the car.
How big of wire do you need for parking brake on DVD player?
Strip the ends off of the wire that is supposed to be connected to the parking brake, the ground for the dvd player and the ground wire from the car. You only need about 1/2 inch to 1/4 inch of exposed wire.
Where do I find the parking brake wire to connect to?
The manual states that all DVD functionality and BT detailed setup requires that wire to be hooked up to a pulsed 12v. The problem is the radio defaults to network mode instead of speaker mode. That is what is preventing the sound to come through the speakers – I need to switch it to speaker mode, which I cannot do until I hook up that wire.
Is it possible to bypass the parking brake on a DVD player?
When wiring the dvd unit, you can bypass this safety feature on some models, while others require you to buy additional parts to accomplish this. Most newer models have switched to a system that senses motion and won’t turn on regardless of how you wire it. However, some are still possible to bypass the old-fashioned way.
How do you hook up a DVD player to the dash?
Connect the three wires by twisting them together and covering them with an end cap if you have one, or electrical tape if you don’t. Place the unit back inside the dash. Turn the unit on to ensure that the wires didn’t come loose as you were placing it back into the dash.
How do I hook up the parking brake wire?
Unbelievable. So how do I hook up to the parking brake wire; is this just a crimp-on parallel connector? Just wire it to ground. It’s supposed to keep you from playing dvd’s and making calls when the parking brake is disengaged, but you can just keep it constantly fooled by grounding it.
Strip the ends off of the wire that is supposed to be connected to the parking brake, the ground for the dvd player and the ground wire from the car. You only need about 1/2 inch to 1/4 inch of exposed wire.
What is the parking brake wire on a Kenwood?
On the Kenwood units the parking brake wire is light green, if you want video anytime connect this wire to a GROUND (negative). Make sure not to connect this wire to a hot (positive) or you will fry your new dvd player. Now be aware that in most states it is illegal to have video playing where the driver can watch.
When wiring the dvd unit, you can bypass this safety feature on some models, while others require you to buy additional parts to accomplish this. Most newer models have switched to a system that senses motion and won’t turn on regardless of how you wire it. However, some are still possible to bypass the old-fashioned way.