How can I read the ABS code on my Acura?

How can I read the ABS code on my Acura?

Allow your OBD-2 scanner to connect to the vehicle. This may take a few seconds. Select ACURA from the menu. Next, select the Anti-lock Brake System menu. Using an OBD-II Scanner that can read the ABS, read codes from the ABS module.

What does an X mean on an Acura TLX?

An X indicates that the vehicle was not manufactured for a specific year. Learn more about car Reliability. The Reliability score is based on our latest subscriber survey of 2018 Acura TLX owners. The owner comments describe problems respondents experienced with this vehicle.

Why does my Acura ABS light keep coming on?

Common symptoms that you may notice when there is a problem with the Acura ABS: Wheels may lock and slide when braking. Common problems that trigger the ABS light to stay on: To reset the ABS light on an Acura, you first need to read the codes with an ABS scanner.

Are there any recalls on the 2018 Acura TLX?

Based on information received from our latest subscriber survey, our reliability history charts give you a rundown on how used vehicles are holding up in 17 potential trouble spots, ranging from the engine, transmission, and brakes to power equipment and the electrical system. The 2018 Acura TLX has been recalled 1 time by NHTSA. View Recalls

Allow your OBD-2 scanner to connect to the vehicle. This may take a few seconds. Select ACURA from the menu. Next, select the Anti-lock Brake System menu. Using an OBD-II Scanner that can read the ABS, read codes from the ABS module.

What kind of audio system does Acura TLX have?

This is the most reported scenario. You want to tap a rear deck midwoofer and the rear deck subwoofer for a greater signal range to your aftermarket sub amp combo. This vehicle uses an ANC system and microphones to cancel out sound waves and make the cabin of the vehicle quieter.

Based on information received from our latest subscriber survey, our reliability history charts give you a rundown on how used vehicles are holding up in 17 potential trouble spots, ranging from the engine, transmission, and brakes to power equipment and the electrical system. The 2018 Acura TLX has been recalled 1 time by NHTSA. View Recalls

Why does my Acura TLX stall when I brake?

Blower (fan) motor, A/C compressor, condenser, evaporator, heater system, automatic climate control, refrigerant leakage, electrical failure. Accessory belts and pulleys, engine computer, engine mounts, engine knock or ping, oil leaks. “The car will stall when you brake to almost a stop then want to accelerate again.

How much does it cost to replace an ABS control module?

It will cost a minimum of about $300 to replace an ABS control module, but could cost about $1,500. This total will also have additional fees and taxes added onto it as well.

How can I tell if my ABS control module is bad?

You should be able to just lightly press your foot down on the brake pedal for the braking to work. If you have to increase your effort just to do this, then your ABS control module may be bad. In rare cases where your ABS control module doesn’t work, the speedometer on the dashboard will stop working.

Common symptoms that you may notice when there is a problem with the Acura ABS: Wheels may lock and slide when braking. Common problems that trigger the ABS light to stay on: To reset the ABS light on an Acura, you first need to read the codes with an ABS scanner.

How does the code work on an Acura 90-94?

The codes will repeat until the key is turned to the OFF position. 90-94 models: The ECU will flash a long blink to represent the first digit of the code, then a series of short blinks to represent the second digit. For example, 1 long blink, followed by 4 short blinks equals code 14. Four long blinks followed by five short blinks equals code 45.

What is the code for an Acura transaxle?

For example, 1 long blink, followed by 4 short blinks equals code 14. Four long blinks followed by five short blinks equals code 45. NOTE: Legend Models: If code 7 or 17 is stored and the S4 light on the transaxle indicator panel is also flashing, it may be necessary to diagnose the automatic transaxle control unit.

How to find trouble code on Acura 86-89?

To retrieve trouble codes, turn the ignition key to the “on” position with the engine off. 86-89 models: The ECU will flash many short blinks. The total number of blinks equals the code number. For example, 12 short blinks equals code 12, nine short blinks equals code 9, etc..

For example, 1 long blink, followed by 4 short blinks equals code 14. Four long blinks followed by five short blinks equals code 45. NOTE: Legend Models: If code 7 or 17 is stored and the S4 light on the transaxle indicator panel is also flashing, it may be necessary to diagnose the automatic transaxle control unit.

What does ABS error code 52-01 mean?

My 2010 Honda Insight had a bad 12 V battery three days back and Check ABS waring light came up. After some time it went off and i change the 12v battery into a new one. But today too got the same error massage and did a Scanning to get this error code ABS 52-01 Pump Motor Relay Open Circuit. What does this means??

To retrieve trouble codes, turn the ignition key to the “on” position with the engine off. 86-89 models: The ECU will flash many short blinks. The total number of blinks equals the code number. For example, 12 short blinks equals code 12, nine short blinks equals code 9, etc..

Where is the DTC code on an Acura?

1. Connect SCS service connector special tool No. 07PAZ-0010100, or equivalent, to service check connector located under the passenger’s side of dash. 2. Turn the ignition on. 3. MIL will indicate DTC’s by outputting a number of flashes. Remember, these are manufacturer specific codes only.

Where is the Diagnostic Code on a 1991 Acura Integra?

On all models except 1991 Integra, move front passenger seat to rear position. On 1991 Integra models, pull down passenger side carpet from under dashboard. On all models, turn ignition On and observe red LED on front or top of ECU. The LED will indicate diagnostic trouble codes (DTCs) by number of flashes.

What to do if your Acura Dashboard Light does not turn on?

Park your ACURA in a safe area where you can work safely. Locate the diagnostic port under the dashboard. Turn on the ignition. All ACURA dashboard lights should turn on but do not start the engine. If your ACURA has START/STOP button, press it twice without pressing on the brake pedal. Allow your OBD-2 scanner to connect to the vehicle.