Do you need to change the thermostat on a Cavalier?

(The RTV silicone acts as a replacement for the standard paper gasket because it creates a better seal.) Bolt the thermostat housing back onto the intake manifold of the Cavalier. Do not change the thermostat when the Cavalier engine is hot. Radiator fluid will burn skin when heated.

How do you replace the thermostat on a Chevy Silverado?

Use a ratchet and 10mm socket to remove two bolts from the thermostat housing. Slowly pull off the thermostat housing. More coolant will drain and the thermostat will slide out of its position. Use sand paper to remove any corrosion on the thermostat housing block.

Can you replace the thermostat on a GM 3100?

Replace the thermostat on your GM 3100 or 3400 vehicle with this nifty tutorial. The video shows you how to replace a thermostat on a 3.4L GM but it should also help you repair a 3.1L GM as well. Just a heads up – you’ll need to replace an o-ring when you install the new thermostat as well.

Can you replace a thermostat on a GM 3.4L?

The video shows you how to replace a thermostat on a 3.4L GM but it should also help you repair a 3.1L GM as well. Just a heads up – you’ll need to replace an o-ring when you install the new thermostat as well.

(The RTV silicone acts as a replacement for the standard paper gasket because it creates a better seal.) Bolt the thermostat housing back onto the intake manifold of the Cavalier. Do not change the thermostat when the Cavalier engine is hot. Radiator fluid will burn skin when heated.

Where is the radiator hose on a Cavalier?

If you’re not sure, look where the radiator hose connects to the intake manifold of the Cavalier. The part that the hose connects to is the thermostat housing. Loosen the clamp that holds the hose to the housing with a screwdriver. Pull the hose off the intake manifold.

How do you remove the thermostat from an intake manifold?

The part that the hose connects to is the thermostat housing. Loosen the clamp that holds the hose to the housing with a screwdriver. Pull the hose off the intake manifold. Remove the bolts that hold the thermostat housing onto the intake manifold with a box wrench. With the bolts removed, lift the housing off the intake.

If you’re not sure, look where the radiator hose connects to the intake manifold of the Cavalier. The part that the hose connects to is the thermostat housing. Loosen the clamp that holds the hose to the housing with a screwdriver. Pull the hose off the intake manifold.

The part that the hose connects to is the thermostat housing. Loosen the clamp that holds the hose to the housing with a screwdriver. Pull the hose off the intake manifold. Remove the bolts that hold the thermostat housing onto the intake manifold with a box wrench. With the bolts removed, lift the housing off the intake.