Can a mechanic fix a 04 Impala traction control light?

I AM NOT A MECHANIC! I WILL NOT BE HELD RESPONSIBLE FOR ANY DAMAGES THAT YOU DO TO YOURSELF AND YOUR CAR IF YOU CHOOSE TO FOLLOW THIS! Here is a small list of things that you will need in order to fix this problem.

What’s the problem with the traction control light on?

Repair Topics > Brakes > Abs light on, traction… Shops are reporting problems with the abs light on, traction control light on with Impala vehicles. The problem affects 2012 and 2013 vehicles and may also present as a message on the driver information center with a “Service Stability System” message.

How to fix the ABS light on a 04 Impala?

While the lug is unbolted heat up your soldering iron and apply some solder where with lug was crimped onto the wire were the wire is exposed on both sides of the crimp. Put heat shrink tube over this all the way to the end of the crimp where the now soldered wire is showing.

How to fix ABS / traction control light on a 04 Impala?

How to Fix the ABS/Traction Control Light on a 04 Impala 1 Things You Will Need. Once again, as with all of my Instructables I give this warning. 2 If you have a scanner it will tell you it is a part of a malfunctioning ABS system or bad ground somewhere…..Mechanics will tell you that it is 3 The Fix. 4 Optional.

Repair Topics > Brakes > Abs light on, traction… Shops are reporting problems with the abs light on, traction control light on with Impala vehicles. The problem affects 2012 and 2013 vehicles and may also present as a message on the driver information center with a “Service Stability System” message.

How do you turn off traction control on a car?

Many vehicles with traction control have a switch that lets you temporarily turn it off. The switch is usually marked “TCS Off” or “ESC Off.” Once you switch it off, it will stay off until you either switch it back on or turn off and restart your vehicle.