Are there any problems with the Acura CL?

Are there any problems with the Acura CL?

Problems have been seen with the 2nd generation CL models equipped with automatic transmissions (manual transmission models are unaffected). Reports say that after an average of around 40,000 miles, the transmission experiences gear failures, such as downshifts, slipping, flaring and not shifting, and leaking.

What kind of transmission does the Acura CL have?

The 4-cylinder model had an option for a 5-speed manual transmission. The CL also featured Galvanized body panels which helps to prevent rust. For the 1999 model year, the Acura CL’s sibling, the TL, was redesigned.

When did the Acura CL type’s come out?

In 2002, Honda Access America developed a performance package for the CL Type S, which was built in concert with tuning firm Comptech.

Where was the second generation Acura CL made?

With the advent of the 2nd gen TL in 1999, the transverse engined CL became more precisely a TL coupe. All Acura CLs were built at Honda ‘s plant in East Liberty, Ohio, which is also the plant that builds the Honda Civic.

When did Acura stop using a manual transmission?

One of the main criticisms of the CL was that a manual transmission had been dropped when the car was redesigned for the 2001 model year. Very few manual transmission models were built; there were 2,691 without navigation and 820 with navigation, for a total of 3,511.

What kind of alloy wheel does an Acura CL use?

The alloy wheel design was different on the 3.0 for each year, moving from a five-spoke design (MY 1997) to a seven-spoke design (MY 1998), to a different multi-spoke alloy design for the 1999 model year. The 2.2/2.3 CL used a six-spoke design for 1997, then moved to a 5-spoke double-prong design for 1998 and 1999.

Problems have been seen with the 2nd generation CL models equipped with automatic transmissions (manual transmission models are unaffected). Reports say that after an average of around 40,000 miles, the transmission experiences gear failures, such as downshifts, slipping, flaring and not shifting, and leaking.

The 4-cylinder model had an option for a 5-speed manual transmission. The CL also featured Galvanized body panels which helps to prevent rust. For the 1999 model year, the Acura CL’s sibling, the TL, was redesigned.

In 2002, Honda Access America developed a performance package for the CL Type S, which was built in concert with tuning firm Comptech.

With the advent of the 2nd gen TL in 1999, the transverse engined CL became more precisely a TL coupe. All Acura CLs were built at Honda ‘s plant in East Liberty, Ohio, which is also the plant that builds the Honda Civic.

When did the Acura CL come out for sale?

The Acura CL is a midsize coupé manufactured by Honda ‘s Acura brand from February 19, 1996 to 1999, and from 2000 to 2003. The CL is often thought to have been a replacement for the Acura Legend coupé, but with the advent of the TL in 1996, which directly replaced the Vigor, the CL is more precisely a TL coupé.

The Acura CL is a midsize coupé manufactured by Honda ‘s Acura brand from February 19, 1996 to 1999, and from 2000 to 2003. The CL is often thought to have been a replacement for the Acura Legend coupé, but with the advent of the TL in 1996, which directly replaced the Vigor, the CL is more precisely a TL coupé.

The alloy wheel design was different on the 3.0 for each year, moving from a five-spoke design (MY 1997) to a seven-spoke design (MY 1998), to a different multi-spoke alloy design for the 1999 model year. The 2.2/2.3 CL used a six-spoke design for 1997, then moved to a 5-spoke double-prong design for 1998 and 1999.

One of the main criticisms of the CL was that a manual transmission had been dropped when the car was redesigned for the 2001 model year. Very few manual transmission models were built; there were 2,691 without navigation and 820 with navigation, for a total of 3,511.

When did the Acura CL sport come out?

The CL, however, was never produced as a 2000 model and instead in March 2000 the completely redesigned Acura CL was released as a 2001 model featuring a 3.2 L SOHC VTEC J-series V6. A navigation system was also available along with the Type-S model, denoting Acura’s ‘Sport’ edition.

The CL, however, was never produced as a 2000 model and instead in March 2000 the completely redesigned Acura CL was released as a 2001 model featuring a 3.2 L SOHC VTEC J-series V6. A navigation system was also available along with the Type-S model, denoting Acura’s ‘Sport’ edition.

Why are the solenoids on my Acura not working?

Multiple solenoids are mounted on the valve body of the Acura transmission. Due to age, these solenoids can fail or get sticky, causing erratic shifting. Sensors mounted on the valve body can get dirty or stop working if there is a short in the wire harness. It is possible to overhaul the valve body instead of replacing it.

What kind of seats does an Acura CL have?

Both the 4-cylinder and 6-cylinder CL offered a “Premium” trim level which offered leather upholstery (with heated front seats in the 3.0), and in the 3.0, an Acura/Bose stereo. For the 1999 model year, the “Premium” trim level was eliminated, and leather upholstery became standard on all models, as was a trunk cargo net.

Why is no air coming out of my Acura radiator?

I tried the following: 1. I change the temperature to 90 degrees but no air comes out. 2. I check the fuses on the panel under the dashboard next to the door and the fuses seem to be alright, according to the people at Acura the Radiator the Blower and the A/C Compressor are all on the same circuit so the other three would have gone as well.

Is the Acura CL a replacement for the RL?

The CL was not a direct replacement for the Legend coupe as it no longer shared the same chassis as its sedan counterpart, and was not made in Japan, unlike the RL. Because Acura no longer had a suitable Legend coupe replacement, they created the CL.

What kind of engine does an Acura CL have?

The 1998 and 1999 models featured a 2.3 L ( F23A1) with 150 hp (112 kW). Both the 4-cylinder and 6-cylinder CL offered a “Premium” trim level which offered leather upholstery (with heated front seats in the 3.0), and in the 3.0, an Acura/Bose stereo.

When did the Acura Legend coupe go out of production?

Following the end of the 1995 model year, the Acura Legend coupe disappeared from Acura’s lineup when the sedan version was renamed the Acura RL. The CL was not a direct replacement for the Legend coupe as it no longer shared the same chassis as its sedan counterpart, and was not made in Japan, unlike the RL.

What kind of timing belt does an Acura CL have?

F23 Timing Belt Part Cross Reference Make Model Year Acura CL 1997–1999 Honda Accord DX, LX, EX 1994–2002 Honda Odyssey 1997 Isuzu Oasis 1998–1999

Which is the best Acura for 0 to 60?

Welcome to the most complete Acura 0-60 & quarter mile times resource online offering a comprehensive index of Acura 0 to 60 car specs, including Acura TL, Acura Integra, Acura MDX, Acura TSX, RSX Acura, Acura Legend, Acura CL and many more!

What causes a transmission failure in an Acura CL?

Reports say that after an average of around 40,000 miles, the transmission experiences gear failures, such as downshifts, slipping, flaring and not shifting, and leaking. One main cause is excessive wear of the 3rd gear clutch pack, resulting in large amounts of debris blocking the flow of transmission fluid.

Is the Acura 3.2CL type’s a good car?

The manumatic is a brilliant execution applied to the wrong concept. The Type S exhibits the same general competence that puts the Honda Accord on our 10Best list with inevitable regularity. That same mix of virtues vaulted the 3.2TL to first in a comparo of nine luxury vehicles earlier this year .