How big is a timing cover bolt kit?

1 – 8mm x 1.25 x 20mm (short bolt from block to back side of cover) 1 – 8mm x 1.25 x 50mm (from cylinder head to timing cover) We are switching over to bolts with captured or integrated washers rather then loose washers, This kit may include bolts of either type.

How to replace timing chain on Toyota 22R?

The following are instructions on replacing the timing chain in a Toyota 22R/22RE/22RET without removing the head. Parts needed: Timing Chain Chain Guides; metal backed are better than the stock plastic ones, two sources for these listed below: http://www.doaracing.com/ http://www.engnbldr.com/ Chain Tensioner

Where does the timing chain cover go on a water pump?

Although only the 1 bolt in the middle of the water pump holds the timing chain cover on it is a lot easier to take it off now.

How many bolts are in a timing chain?

There is also one more bolt (not shown in the image below) behind/below the “two water pipe bolts”, so there are in total 18 bolts holding the cover in place, be sure all 18 have been removed before attempting to remove the timing chain cover.

Although only the 1 bolt in the middle of the water pump holds the timing chain cover on it is a lot easier to take it off now.