What are the torque specifications of a Jeep Cherokee?

31.18 XJ – FRONT Brake Hose to Caliper Inlet Fitting Bolt Type: Bolt 27.12 XJ – Brake Pedel Pivot Pin Nut

Do you have to torque the clutch cover?

Torque the 6 bolts on the clutch cover. Yes, not much required for those little bolts. I was about to replace my clutch this weekend and was surprised by that as well. seems low to me but thats what the FSM calls for! Torque the 6 bolts on the clutch cover. Yes, not much required for those little bolts.

What kind of bolts are in a Jeep Cherokee?

27.12 XJ – Brake Pedel Pivot Pin Nut Type: 7.5 10.17 XJ – REAR Wheel Cylinder Mounting Bolts Type: Bolt 40.67 XJ – FRONT Caliper Mounting (Guide) Pins Type: Bolt 104.4 XJ – FRONT Caliper Achor Plate Bolts Type: Bolt 40.67 XJ – REAR Crossmember to Chassis Sill Bolts Type: Bolt

What are torque specs for pressure plate flywheel?

Pressure plate torque specs? im finally putting my truck back together after my major oh shit and im doin my last minute read ups. the torque specs for the pressure plate to flywheel are 14ftlbs. is that right? it sure seems low to me, but just checkin with the pros here before i get all greasy. thanks guys Torque the 6 bolts on the clutch cover.

What was the horsepower of the 1987 Comanche?

The original 1987 model was rated at 173 horsepower at 4,750 RPM and 220 foot-pounds of torque at 2,000 RPM. The horsepower rating for this version was raised to 177 horsepower at 4,750 RPM and 224 foot-pounds of torque at 2,400 RPM for model years 1988 through 1990.

What kind of engine does a Comanche MJ have?

2.1L 4 cylinder Turbo Diesel – 85 hp, 132 ft lb torque. The transfer cases used are all chain driven with aluminum housings. NP stands for “New Process” which is the brand, if you will. Front Driveshaft – On 86-87 MJs (NP207 t-case) the front shaft is a “GKN” style shaft.

31.18 XJ – FRONT Brake Hose to Caliper Inlet Fitting Bolt Type: Bolt 27.12 XJ – Brake Pedel Pivot Pin Nut

What was the first year of the Comanche?

The “first generation” was introduced in the 1987 model year. This version used a Renault/Bendix (“Renix”) designed, multi-port fuel injection system. The original 1987 model was rated at 173 horsepower at 4,750 RPM and 220 foot-pounds of torque at 2,000 RPM.

When did the Jeep Cherokee XJ come out?

This page will detail the stock specs of the Jeep Cherokee (XJ) which was produced between 1984 – 2001 in the United States. That is a remarkable 18 year lifespan in which 2,884,172 Jeep Cherokees rolled off the assembly line!

What was the lifespan of the Jeep Cherokee?

That is a remarkable 18 year lifespan in which 2,884,172 Jeep Cherokees rolled off the assembly line! Originally designed and built by AMC, Chrysler continued the same design when they bought AMC in 1987. Anyways, the Cherokee was the icon of compact SUVs which led to a market full of those who tried to imitate it.

What are the dimensions of a Jeep XJ?

The suspension consists of coils for the front and leaf springs for the rear. All XJs came with disc brakes in the front and drums in the rear. Dimensions (small differences may occur depending on optional equipment or trim level) wheelbase = 101.4″ overall length = 165.3″ – 168.8″ overall width = 67.9″ – 70.5″ track = 58″ height = 64″

When did the Jeep Cherokee get a new engine?

A stiffer unibody frame brought improvements to noise, vibration, and harshness (NVH) measurements. Also contributing to NVH improvements were new door seals that reduced wind noise at higher speeds. In the middle of the 1999 model year, vehicles with the 4.0 L engine received a revised intake manifold.

Where does the Jeep Cherokee XJ come from?

Indonesia: Pademangan, North Jakarta (PT. Indonesian Swedish Manufacturing Company) The Jeep Cherokee (XJ) is a compact sport utility vehicle manufactured and marketed across a single generation by Jeep in the United States from 1983 to 2001 — and globally through 2014.

Is there a two door version of the Jeep Cherokee?

Both two- and four-door versions of the XJ Cherokee were offered throughout its lifetime, each having exactly the same track and wheelbase measurements. Two-door models, however, received longer doors and front seats that could fold forward to assist in rear passenger entry and exit.

How to repair a 1999 Grand Cherokee for free?

Access our free Torque Specifications Repair Guide for Cherokee, Grand Cherokee, 1999-2005 through AutoZone Rewards. These diagrams include: Access our Cherokee, Grand Cherokee, 1999-2005 Torque Specifications Repair Guide by creating an account or signing into your AutoZone Rewards account.

What kind of drain plug does a Jeep Cherokee use?

XJ – Transfer Case Drain Plug Type: Bolt Head: Hexagon 20 240 27.12 XJ – MANUAL Transmission Drain Plug Type: Bolt Head: Hexagon Drive Shaft To Transfer Case Assembly 22 264 29.83 XJ – Driveshaft to Transfer Case Flange Bolts Type: Bolt Head: Hexagon Drive Shaft To Transfer Case Assembly 35 420 47.45 XJ – FRONT Universal Joint Flange Nut Type:

Where can I find torque specifications repair guide?

Once you sign in, follow these instructions to access our Repair Guides. Add your vehicle in Manage My Vehicles. Enter your vehicle details. Click the “View More” button, and then click “Vehicle Repair Guides.” Select the chapter “Torque Specifications Repair Guide”.

What should I do about my 1997 Grand Cherokee torque converter?

1997 Jeep grand Cherokee Torque Converter lock up solenoid Replacement. Easy Way? – YouTube 1997 Jeep grand Cherokee Torque Converter lock up solenoid Replacement. Easy Way?