What size socket for wheel hub assembly?

The eight sockets are: 26, 27,29, 30, 32, 35, 36, and 38 mm.

What size socket for wheel bearing nut?

36mm is the size you need. your gonna need a torc wrench and a cheater bar for that too. Please don’t use a cheater bar on a torque wrench. Or ever use a torque wrench to loosen a bolt.

What tools do u need to change a wheel bearing?

What Tools Do I Need To Replace A Wheel Bearing?

A set of needle-nosed pliers.
ratchet wrench with various sized sockets.
flat-head screwdriver.
jack.
star wrench for loosening nuts on the wheel.

Do you need to replace wheel hub bolts?

The fasteners must be replaced with new fasteners anytime they become loose or are removed. Failure to replace these fasteners may cause loss of vehicle control and personal injury.

What size is the axle nut on a 2001 Chevy Silverado?

2-16 Inch
Dorman AutoGrade 2-16 Inch Thread Axle/Spindle Nut.

What is an axle nut?

Axle nuts are pieces of hardware that are used to help secure a wheel to an axle. Axle nuts are pieces of hardware that are used to help secure a wheel to an axle.

What size are wheel hub nuts?

If you mean the wheel nuts, 19mm is correct, if you mean the actual hub nut (that holds the driveshaft on and has the split pin in it) then 32mm sounds about right.

What size is the axle nut on a 2000 Silverado?

The 2000 Chevy Silverado front axle nut size iS35 mm. The transmission fluid needs to be replaced every 30,000 to 60,000 miles.

Is it hard to change a wheel bearing?

Is it easy to replace a wheel bearing at home? Replacing a wheel bearing that comes as an assembly with the hub and bolts to the spindle or steering knuckle is not very difficult if you have proper skills, tools and the manual. Of course, the large axle nut is very tight and can be difficult to remove.

Can I reuse wheel hub bolts?

Overtorque or under-torquing your axle nuts can severly shorten the life of the hub assembly. As for the bolts, they aren’t TTY (torque to yield) so they can be reused.

Can you replace a wheel stud?

If you’re just like everyone else, you’ve tightened the lug nuts on your car without using a torque wrench. You’re an “all the muscle you can put into it” kind of guy, and now you’re staring at a broken wheel stud. You can fix tire bolts yourself in about an hour and for less than $50.

How big are the tires on a Chevy Cavalier?

I have tires on rims off a 2000 Chevrolet Cavalier tire size 205/55/R16 with a 5 bolt pattern. Hi,Brenda Rogers,The rims size is 16*6.5 offset is 35,bolt pattern is 5*100.Other vehicles like chevrolet beretta corsica.

How much torque does a hub bearing have?

Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm

How big is a GMC bolt pattern wheel?

CHEVROLET/GMC Wheel Size(s): 12 X 4 ~ 13 X 5 ~ 13 X 5.5 ~ 14 ~ 14 X 5.5 ~ 14 X 6 ~ 15 ~ 15 X 6 ~ 15 X 7 ~ 15 X 8 ~ 16 X 6 ~ 16 X 6.5 ~ 16 X 7 ~ 16 X 7.5 ~ 16 X 8 ~ 16 X 9.5 ~ 16.5 X 6 ~ 17 X 11 ~ 17 X 9.5 ~ 19.5 X 6 ~ 19.5 X 6.75 ~ All CHEVROLET/GMC Wheel Size(s)

How big is a Chevy Blazer bolt pattern?

CHEVROLET/GMC Models / Bolt Pattern and Wheel Size Information: 1 1971-91 CHEVROLET/GMC 1/2 TON BLAZER, JIMMY, SUBURBAN FULL SIZE 2X4. Bolt Pattern: 5 X 127 Stud Size: 1/2-RH Hub Center Bore: 78.1 > Bolt Pattern 2 1971-91 CHEVROLET/GMC 1/2 TON BLAZER, JIMMY, SUBURBAN FULL SIZE 4X4.

Hub Bearing Torque Specification Guide 2010 Make year Model Front torque ft-lbs/Nm Rear torque ft-lbs/Nm

What is the hub bore on a car wheel?

Hub Center Bore: Relates to the center hole in the wheel that centers the wheel on the hub of the car. Since most wheels are mass produced, they have a large center bore to accommodate several different vehicles. If this is the case, it is recommended that you use a hub ring.