Why is one side of my wipers not working?

Why is one side of my wipers not working?

If the nut is a little loose – which is common – the wiper motor will turn the pivot but the wiper arm will not move. You may notice only one wiper working while the other stays at the bottom. If you have this issue, make sure the wiper pivot nuts are tight.

Why are my windshield wipers malfunctioning?

A torn windshield wiper is the most common cause of wiper malfunction. When the rubber edges on your wiper blades are torn, the wiper cannot move smoothly across your windshield and remove moisture or debris. Torn wiper blades almost always require immediate replacement.

How do you diagnose a bad windshield wiper switch?

Common signs include windshield wipers not turning on or off, not changing speed or settings, and the turn signals not working.

Is there a fuse for the windshield wipers?

Wiper motor fuse: Your wiper motor electrical circuit has a fuse that will blow in case of an overload, protecting the motor. The blown fuse will cut the power, shutting down the wiper system. Solution: Check your owner’s manual for the location of your fuses, and to identify which fuse protects the wiper motor.

How do you test a wiper motor?

Use the fuse pattern shown on the cover and locate the wiper motor fuse. Test the fuse using your twelve volt test light. Clip the ground lead to a solid ground source and touch the positive lead to each side of the fuse. If the test light lights up on both terminals, the fuse is good.

How do you align a windshield wiper motor?


  1. Turn the windshield wiper switch off.
  2. Follow the wiper arm away from the wiper blade to its base.
  3. Pry up the plastic dust cap covering the nut.
  4. Select a socket sized to fit the hex nut.
  5. Set the ratchet to allow it to tighten the nut.
  6. Tighten the nut.
  7. Test the wipers.

Why are my windshield wipers not working on my Honda Civic?

If the wipers don’t work after you’ve replaced the fuse, move on to Step 2. If you do not hear the wiper motor humming when you try to use the windshield wipers, then there is likely something wrong with the motor; this will cause your windshield wipers to stop working.

Why are the wipers on my car not working?

Torn wiper blades, a bad wiper motor, a blown fuse, or heavy snow may be why your wipers are not working. Keeping your windshield clear is paramount to a safe driving experience.

Where is the fuse on a Honda Civic wiper?

Your owner’s manual will include information about the specific fuse that controls your windshield wipers, but in most Civics, the fuse is #26. Simply pull out the old fuse with needle-nose pliers and inspect if the thin wire inside has split apart.

When do you turn on your windshield wipers?

Most of the time, your windshield wipers just sit at the base of the windshield, forgotten — until the weather changes for the worse. Then you turn the wipers on, expecting them to perform flawlessly. Whether it’s rain, snow or sleet, you depend on the windshield wipers to help you drive safely in inclement weather.

Why do my wipers stop in the middle of the windshield?

We have a 2006 Honda Civic with the same identical problem as this person with the 2007 Honda. Wipers stop whenever and wherever they choose. If you start on intermitent, they will switch to constant, or vice versa. stop in the middle of the windshield or wherever.

What happens if the intermittent wiper switch fails?

However, when one part malfunctions, it can cause potential safety concerns. One of the most common parts to fail is the intermittent wiper relay switch. The electronic relays that are installed in today’s cars, trucks and SUV’s have to operate in very hot and grueling conditions or are subject to constant abuse.

Why is my wiper blade motor not working?

Similar to the issue above, if you notice that your wiper blades are operating at a different speed or intermittent setting than you selected, it’s a good indication that the relay is damaged and needs to be replaced. This is also a symptom that you don’t want to avoid as it may cause the wiper blade motor to overheat and break prematurely.

When do I Know my wiper relay is bad?

One of the quickest indicators that a problem exists with the intermittent wiper relay is when the wipers are not intermittent and only work at one speed. The relay switch sends an electrical signal to the module that controls the operation of the wiper motor and gears inside.