Why is my window regulator clicking?

Another common symptom of a failing window motor is if you hear a clicking sound when you depress the power window button. In some cases this is caused by debris that is trapped in between the window and the motor assembly.

Is there a problem with the passenger side window switch?

I have noticed a problem with my passenger side window switch. It will roll the window down, but it won’t roll the window back up. I can only roll the window back up using the switch on the driver’s side. In the past, I have taken the trim off of both doors to work on the speakers and apply some Dynamat.

Why does the passenger window click but not roll?

Passenger window does not work. switch makes a “click” type noise but nothing happens with the window. The same sound you get when the windows is all the way up but try to raise it more. I have not opened it up yet to check any voltage to the motor, but I’m thinking it’s a bad motor not switch.

Why is my car window not going up?

If you do hear noise, it’s likely that the switch is functioning but the window motor has malfunctioned. Have a Look – Press the window switch and watch the gauges on the dash. If the volt gauge leaps the smallest amount when pressing the window switch, it is possible the switch is bad.

What does it mean when power window won’t go down?

Suddenly one of the power windows has stopped going down and when i press the button (the driver’s side button for the passenger’s side windows or the passenger’s side window), i just get a click sound on the passenger side window, but it does not go down.

What to do if your passenger side window switch is not working?

A technician that is diagnosing this would use the wiring diagram to find the proper wires to test and check for power when the window is rolled up to see if there is power present when the window is commanded to roll down with the switch.

Passenger window does not work. switch makes a “click” type noise but nothing happens with the window. The same sound you get when the windows is all the way up but try to raise it more. I have not opened it up yet to check any voltage to the motor, but I’m thinking it’s a bad motor not switch.

If you do hear noise, it’s likely that the switch is functioning but the window motor has malfunctioned. Have a Look – Press the window switch and watch the gauges on the dash. If the volt gauge leaps the smallest amount when pressing the window switch, it is possible the switch is bad.

What to do when power window clicks but wont roll?

The metal contact from your switch needs to be cleaned off, alcohol and a small brush or cotton swab will do it. You’ll need to take off the door panel, unhook and remove the window switch module. Carefully pry off the top of the switch module. Be careful with the top, there’s nothing holding them switches in!