Why is my Acura TL saying Please check disc?

Fixed mine by getting a proper charge into the battery and turning the key off then on to reset the please check disc message. For me the battery was too low for the software disc drive to function.

How can I get my Acura navigation system to work?

If you have the original car’s VIN and the serial number of the DVD Rom Navi unit then you can retrieve it online through Honda / Acura. Without the Navi code (the 4 digit anti-theft code used to activate the navigation system) it won’t work.

How to repair the DVD ROM on an Acura?

Either repair the DVD Rom by sending it to Alpine, or find a refurbished unit, or one from an auto-wrecker. Make sure that if you go the auto-wrecker route that you can get the Navi code for the DVD Rom unit, otherwise you won’t be able to access the GPS system.

Fixed mine by getting a proper charge into the battery and turning the key off then on to reset the please check disc message. For me the battery was too low for the software disc drive to function.

What does it mean when it says ” Please check your disc “?

Once you get this error where it says “Downloading Software” and then, “Please Check your Disc”, it’s not a good sign. It means that either the DVD Rom Navigation is failing, or you have a scratched disc.

Why does my Acura RDX say ” please check your disc “?

Just went through this with my 2008 RDX. Once you get this error where it says “Downloading Software” and then, “Please Check your Disc”, it’s not a good sign. It means that either the DVD Rom Navigation is failing, or you have a scratched disc.

Where can I get the Navi code for my Acura?

Make sure that if you go the auto-wrecker route that you can get the Navi code for the DVD Rom unit, otherwise you won’t be able to access the GPS system. If you have the original car’s VIN and the serial number of the DVD Rom Navi unit then you can retrieve it online through Honda / Acura.

What to do if your navigation disc is damaged?

Your navigation disc may be damaged. Remove it from the tray in the trunk and check for scratches. It may have to be replaced. 34 people found this helpful. ok, checked for scratches but don’t see any. should the cd remain in or should it be taken out or it should remain in the cd drive at all times? 13 people found this helpful.

How to check and repair disk errors using CHKDSK?

When Command Prompt launches, type the command chkdsk C: /f /r /x. By using the chkdsk command [chkdsk C: /f /r /x], you’ll be able to check and scan the C drive for errors, and repair the file system corruption and bad sectors if errors were found. #4. How to Scan and Repair Disk Errors Using Chkdsk Alternative

Where can I find the check disk tool?

Apart from using Command Prompt to launch Check Disk tool, you can also access it from the partition properties. Double click “My Computer/This PC” -> Right-click Drive ->Properties > Tools tab -> Check or Check Now.

What to do if disk check is not performed?

The Disk Check Could Not Be Performed Because Windows Cannot Access the Disk FAQ 1 Check the disk connection. 2 Change the drive letter of the problematic partition. 3 Check and repair the hard drive issues.

How to run check disk Windows 10 CHKDSK?

Run Check Disk Windows 10 from Partition Property You can run Windows 10 CHKDSK from Windows desktop and the detailed steps are as below. Step 1. Right-click Windows Start Menu and select Disk Management to open it. Step 2.

How do I update my Acura TL clock?

1) Eject the DVD while the ignition is in the ACCESSORY or ON position. 2) Turn the car off and disconnect the battery for at least 10 mins. 3) Reconnect the battery and start the car. 4) Insert DVD. 5) It could take a few minutes for the system to update.

How to check disk for errors using CHKDSK?

The chkdsk allows you to check your disk and file system for physical and logical errors, find bad sectors and fix problems found. In this article, we’ll look at the specifics of using the chkdsk tool in Windows 10, as well as a way to check the disk using the Repair-Volume PowerShell cmdlet. How to Check Disk for Errors Using CHKDSK on Windows 10?

How does CHKDSK reduce offline disk check time?

The spotfix parameter can significantly reduce the offline disk check time from hours to seconds. Instead of a full drive scan, it only searches for and fixes errors previously recorded in the $corrupt file (populated during a normal disk check). In this case, chkdsk immediately fixes errors without wasting time scanning the entire drive.

How do I do a disk check in command prompt?

To do this, open up command prompt (click Windows key + X then select Command Prompt – Admin ). In the command prompt window, type in CHKDSK then a space, then the name of the disk you wish to check. For example, if you wished to perform a disk check on your C drive, type in CHKDSK C then press enter to run the command.

How can I stop the automatic disk check?

To stop the automatic disk check, you have to clear the dirty bit by following this tutorial: How to Manually Clear or Set Dirty Bit on Windows Volume It’s much easier to stop the scheduled disk check. You can cancel the scheduled disk check using either Command Prompt or Registry Editor. Open a Command Prompt as an administrator.

How can I cancel the scheduled disk check?

You can cancel the scheduled disk check using either Command Prompt or Registry Editor. Method 1: Using Command Prompt Open a Command Prompt as an administrator. If you want to disable a scheduled disk check on C: drive, type the following command and press Enter.

Is there a problem with the Honda DVD navigation system?

When you drive, do you sometimes see a message that says, “ DVD disc reading error “? When you start the car, is the “ OK ” button missing so that you can’t start the navigation system? If you said yes to either, then your DVD navigation system needs to be fixed, and this Honda navigation fix procedure is for you.