Why does my tail light not work but my brake light does?

Here is a more detailed list of the most common causes when taillights do not work, but brake lights do. Brake lights typically use a dual filament bulb, and it’s possible for just one of those filaments to break. When that happens, you’ll get function out of one side of the bulb, like the brake light, but not the taillight.

Is it dangerous to drive with broken tail lights?

So, driving with broken tail lights is very dangerous. Actually, people find out about their tail light problem when the police officer pulls them over. This is because the tail light malfunction is not that easy to spot. Usually, brake lights are the problem and the tail lights work just fine. But, sometimes it’s the opposite.

When do you need to replace tail light bulbs?

You need to replace bulbs if they have got darkened or the filaments are blown. Choose the new bulbs of the same type and wattage. In most European cars, the same bulb does the job of the tail and brake lighting. However, it has double filaments, allowing one set still working while the other set is burnt.

Is it dangerous to drive with brake lights not working?

Driving at night with either brake lights or tail lights not working is dangerous for you and other drivers on the road. It takes a long time to notice when the brake lights not working but tail lights are or vice versa. It is so because you won’t know what is happening in the backside while driving until someone points it out.

Why are the tail lights not working?

Tail lights do not work when the headlight switch is activated. As noted above, different automotive manufacturers have different tail lamp bulb configurations. In many cases when the lights don’t work when the headlight is turned on, it is caused by a burnt out or short circuited tail lamp bulb.

Why would the tail lights not work?

Sometimes, pressing the brakes turns off the tail lights too and they don’t start working again until you let the brakes off. The possible reasons for brake lights not working but tail lights are: Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are.

Why are my brake lights not working?

When your brake lights don’t work, it is usually because of a blown fuse, a worn-out or broken brake light switch, or a burned-out light bulb. And on most vehicles, the brake light system is usually a simple circuit that includes a brake light switch, the light bulbs or lamps, a fuse,…

Why are my running lights not working?

If the running lights are not working, one of the first things to check is the presence of a blown fuse. If all of the lights are connected on the same circuit and one of the fuses is blown, then the lights will not work.

How can you tell if a tail light bulb is still working?

Unscrew the bulbs in question and check them the way you would any household bulb: by looking at the filament wire inside them to determine if it is still intact. The bulb can be checked by tapping it against your hand to see if the filament is moving or vibrating.

What should I do if my tail light has blown out?

Use your fingers or a tweezer to take out the fuse. Most new cars have a fuse extractor in the fuse box or in the tool kit. It is a small white plastic tool that resembles a pair of pliers. Bring it to an auto store to find a match, then buy a replacement and insert it in the proper position to replace the blown fuse. Look at the tail lamp wiring.

Why are both my tail lights not working?

Possibly the most common reasons why tail lights are not working is because of the burned bulb. As we all know, every car’s light is manufactured and made out of the light bulbs. These lights are very similar to the house light bulbs and they also can burn or malfunction. Nov 17 2019

How do you replace tail light bulb?

Step 1: Open the lift gate. Step 2: Remove the two 10mm bolts. Step 3: Pop the tail light free from the pins on the side. Step 4: Disconnect the tail light electrical connector. Step 5: Remove the light bulb fixture assembly. Step 6: Replace the bulbs. Step 7: Reinstall the bulb assembly into the tail light.

Why do your brake lights work but not your tail lights?

The possible reasons for brake lights not working but tail lights are: Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location).

What to do when your brake lights are not working?

In the situation when brake lights are not working properly, you need to make sure that the power is going through and check the fuse. If the brakes lights are turned on at the same time as turn signal lights, you need to bring it to the mechanics for a check.

When do the brake lights come on when the headlights are off?

During the day the headlights are off and only the rear lights are used to indicate that the driver is applying brakes. The taillights come on when your headlights are on or your parking brake is engaged. The brake lights turn on when you apply pressure on the brakes.

Why are the tail lights on MY Titan not working?

2005 Titan trailer tail lights are not working. I have brakes and turns work fine. Changed the three relays still i have no tail lights. The first thing I would check is the trailer wiring running light fuse located in the power distribution box under the hood.

Why do I keep turning my lights on and off at the same time?

If you have a light that you find yourself turning on and off at the same time(s) every day, or if you are constantly forgetting to turn outside lights on when it’s dark, or back off when they are not needed, get an AutoChron to do the work for you.

Why is my pig tail light not working?

If the fixture itself is cheap, consider just replacing it completely. If you continue to have problems, the loose connection isn’t in the light fixture. You can quickly determine this by attaching a pig tail light: .. directly to the feeders in the light fixture. If the pig tail works, the problem is the fixture (most likely the base).

How to convert outdoor light to turn on automatically at night?

Convert your outdoor lights to turn on at night automatically using a photocell. I wanted to convert my exterior light in front of my garage to turn on automatically at dusk and off at daylight. Bonus Tip: Save even more money on electricity by using a fluorescent or LED bulb instead of a regular incandescent bulb for this project.

Why do the tail lights turn on when the car is on?

This way, the driver does not have to worry about turning on the tail lights. Tail lights are wired to the same switch that turns on the head lights, making them function easily. If you have automatic lights, the tail lights will turn on when your vehicle is on.

What to do if your tail light is not working?

Now, if you are certain that your tail light is not working, and the light bulb is just fine, it is recommendable to take your car to mechanics. Simply speaking, every time there is an electrical problem with the car, it is highly recommendable to let the professionals handle it.

Why are there no tail lights on my Ford Escape?

I have no Tail lights though. The turn signals work. The brake lights work and it seem that when I shut the car off, the parking lights come on when the door is open and shut off when the door closes. Is their a fuse that controls the tail light operation. Is so, which one, because the owners manual is not clear at all. Maybe needing a new bulb?

How are tail lights different from head lights?

Average rating from 68 customers who received a Tail Lamp Bulb Replacement. Tail lights are red lights on the back of a vehicle. They are turned on whenever the head lights are on. When stopping, the tail lights have a bright red appearance compared to a dimmer red appearance when the vehicle is in motion.

When to take your tail light to the mechanic?

If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards. Check the taillight lenses.

Why are the rear lights not working on my car?

As the rear lights are not connected, they do not illuminate. A fuse is a band of metal alloy inside a plastic container It is designed to break in the event of a power surge. When the band melts the circuit breaks and protects the electrical system and the lights from damage. One is situated inside the cabin.

Why are the tail lights on my Chevy 1500 not working?

My 1994 chevy 1500 brake lights, head lights, front parking lights and front and rear turn signals work……TAIL LIGHTS do NOT work…..have checked fuses and bulbs…..What could the problem be??? If you have checked to be sure there is 12V to the lights check further to be sure there is a solid ground path. 42 people found this helpful.

When do the tail lights and brake lights come on?

The taillights come on when your headlights are on or your parking brake is engaged. The brake lights turn on when you apply pressure on the brakes. In most automobiles, the taillights are red while the brake lights are a brighter, more luminous red. The rear lights are controlled by the same switch as the headlights.

Why are my brake lights not working on my 1997 Chevy?

Pull the plastic cap off the fuse chassis and you’ll see a square relay fuse switch and replace it for the brakes. It’s only $13 bucks and is the predominant issue with 1997 Chevy Trucks and the brakes not working especially if you reverse and blinker lights do work. Was this answer helpful? Its the taillight circuit board or a broken wire.