Why does my CD player say CD error?

Why does my CD player say CD error?

What does CD error mean? Sometimes a CD player will display a “No Disc” error. What this means is that the CD player, for some reason, does not recognize the disc. There are various reasons for this error, from the CD lens eye being dirty to a CD format that is incompatible with the player.

How do you fix a CD player error?

How to Fix a No-Disc Error on a CD Player

  1. Use a format that the CD player recognizes.
  2. Drench a cotton swab with isopropyl alcohol.
  3. Angle the cotton swab so it can reach the CD player’s laser eye.
  4. Blot the laser eye with the dry end of the cotton swab until the alcohol residue is gone.

How do you fix CD player that won’t read CDs?

Unplug the power cord of the CD player from the AC outlet for 30 seconds. Plug the power cord back into the AC outlet. Turn on the CD player and attempt to play the disc. If the issue is still not resolved, remove the disc and unplug the power cord from the AC outlet.

Why won’t my car CD player take CDs?

If the CD player will not accept the disc or if the disc keeps being ejected, there may be a problem with the disc that you are trying to play or the unit may need to be reset. The disc may eject if inserted upside down. Press the RESET button on the front of the car stereo.

Why is the CD not reading?

If the CD-ROM works in Safe Mode but not in normal Windows, a running program is causing the issue, or the drivers are corrupt. Open Device Manager, highlight and remove the CD-ROM by pressing the delete key. After deleting the CD-ROM, reboot the computer. Windows should then detect the CD-ROM and reinstall it.

How do you reset a CD player?

How to reset the CD player.

  1. Unplug the power cord of the CD player from the AC wall outlet.
  2. Allow the CD player to set without power for 30 seconds.
  3. Plug the power cord of the CD player back into the AC wall outlet.

How do I clean the inside of my car CD player?

How do you clean a CD player in your car?

  1. Confirm there is no CD in the player.
  2. Blow away dust with a handheld air bulb.
  3. Remove the lens cover.
  4. Select a lint-free cleaner.
  5. Wipe a small amount of high-strength isopropyl alcohol onto the lens.
  6. Let dry before replacing the cover.
  7. Try a lens cleaner disc.

How do you fix a DVD that is not reading?

Remove the disc from the DVD player. Use a lint-free cloth and some denatured alcohol or water to clean the disc and remove any dust or smudges that may prevent the player from reading it properly. Reinsert the disc into the player and press “Play” to see if cleaning the disc fixes the “NO DISC” error.

Why does my CD player not work on my Acura MDX?

The CDs got jammed in the player and when I pushed the CD button it gave me a few seconds of a buzzing sound and then I would get an error code EO-1 and the player would jump over to radio. I turned the radio off and on numerous times, pressed the CD button and banged on the player, but the result was always the same.

What to use to remove jammed CD from 2008 Acura MDX?

Security codes for the stereo and nav system (these should be with your car’s purchase papers. If you don’t have them, call the dealer with your VIN and get them) Med size Phillips screwdriver (magnetized shaft would be very handy). Plastic / nylon professional automotive trim prying tool. Do not use screwdrivers to pry the trim.

Where is the radio code on an Acura MDX?

1) Make sure you have the radio code before you do this b/c you will need it to use your stereo after this procedure. Mine was in my owner’s manual binder on the inside jacket cover. If you don’t have it, you can get it from a dealer if you have the serial number of the radio.

Why is my CD player not working on my car?

The CD player no longer responded to the load or eject buttons and would give me an error message that said Er-01. There are a couple threads about this, but here is what I did.

How does a CD slot work on an Acura MDX?

The CD slot has a metal door covering it that opens at precisely the right time to allow a CD to enter or eject. It is putting a CD in immediately after loading another one (before the door has a chance to close) that is usually how you get things jammed in this thing.

Security codes for the stereo and nav system (these should be with your car’s purchase papers. If you don’t have them, call the dealer with your VIN and get them) Med size Phillips screwdriver (magnetized shaft would be very handy). Plastic / nylon professional automotive trim prying tool. Do not use screwdrivers to pry the trim.

How do you remove stereo from Acura MDX?

Remove Stereo System. Open front right door. Take your plastic trim prying tool and carefully pry open the panel at the right end of the dash. it un-snaps along the three sides and kind of hinges open at the door pillar, then you can simply pull it off.