Why do my brake lights only work sometimes?

Why do my brake lights only work sometimes?

If you have a single brake light out and the bulb is good, then the next step is to check the light socket itself. Brake light problems can include a socket whose connections are dirty or corroded, or one whose wiring has become worn to the point where it’s only making an intermittent connection.

What would cause one tail lights not to work?

If only one of the tail lights appears to be out, the mechanic should check to see if the unlit bulb is burned out. Over time, bulbs will eventually fail and need to be replaced. The mechanic will check the filament in the unlit bulb to see if it is broken. If so, he or she will replace the bad bulb with a new one.

What causes a tail light to go out?

A blown fuse usually causes both lights to go out. On newer cars, the tail lamps can be fused separately and/or each bulb or shared circuit can be fused. A fuse can be blown due to other problems, so you’ll need to check more than just the fuse, but it’s the right place to start.

Why do my tail lights not work but my brake lights do?

One of the main reasons why you might see your brake lights working while your tail lights don’t is because the bulbs installed in the tail light were faulty. You should run some tests to make sure if the bulbs are the main culprit or not and to do that, you will need to remove the tail light cover.

What is the difference between a brake light and a tail light?

The main difference between tail lights and brake lights is that the former lights up as soon as the headlights are turned on, while the latter only engages upon stepping on the brake pedal. While both lights are red, brake lights tend to emit a more luminous red light.

Where is the fuse located for tail lights?

The tail light fuse may be located in either the fuse panel in the front passenger side of your vehicle or in the main fuse box under the hood.

What causes brake lights to not work but tail lights do?

5 Causes of Brake Lights Don’t Work But Tail Lights Do 1 Bad Light Bulbs 2 Bad Brake Light Switch 3 Broken fuse or fuse box 4 Bad sockets and connectors 5 Broken wire More …

What to do if your tail light is not working?

Now, if you are certain that your tail light is not working, and the light bulb is just fine, it is recommendable to take your car to mechanics. Simply speaking, every time there is an electrical problem with the car, it is highly recommendable to let the professionals handle it.

When to take a tail light bulb to the mechanic?

If the bulb is fine, your car may have a deeper electrical problem. If the fuse, taillight wires, and bulb are all in good shape, it’s time to take the car to the mechanic. When you remove a bulb for replacement, you should inspect the socket for burnt contacts and the tail lamp for burnt contacts or melted socket boards.

Is it dangerous to drive with broken tail lights?

So, driving with broken tail lights is very dangerous. Actually, people find out about their tail light problem when the police officer pulls them over. This is because the tail light malfunction is not that easy to spot. Usually, brake lights are the problem and the tail lights work just fine. But, sometimes it’s the opposite.

Why would the tail lights not work?

Sometimes, pressing the brakes turns off the tail lights too and they don’t start working again until you let the brakes off. The possible reasons for brake lights not working but tail lights are: Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are.

Why are both my tail lights not working?

Possibly the most common reasons why tail lights are not working is because of the burned bulb. As we all know, every car’s light is manufactured and made out of the light bulbs. These lights are very similar to the house light bulbs and they also can burn or malfunction. Nov 17 2019

How do you replace tail light bulb?

Step 1: Open the lift gate. Step 2: Remove the two 10mm bolts. Step 3: Pop the tail light free from the pins on the side. Step 4: Disconnect the tail light electrical connector. Step 5: Remove the light bulb fixture assembly. Step 6: Replace the bulbs. Step 7: Reinstall the bulb assembly into the tail light.

Why do your brake lights work but not your tail lights?

The possible reasons for brake lights not working but tail lights are: Blown out light bulbs are the most common reason for why the brake lights not working but the tail lights are. Remove the screws from the bulb lens (which you can access through the trunk or see your vehicle repair manual to get the exact location).